Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 217 / 983 ]   Next > >>
Classify Product Title User name Reply Last update
Question TAW4 Adding Music to Video bscheirer 0 2008-11-26 00:21:47
Question TE40 Codecs Jack 1 2008-11-28 05:55:19
Request TE40 mr chugada 1 2008-11-28 05:53:55
Question TE40 Can I make Tmpgenc accept AC3 5.1 audio? Tonyh 3 2009-04-23 00:48:42
Question TE25 TMPGEnc says no DVD player software installed 12au6 1 2009-09-02 13:44:36
Question TDA3 Can you edit audio separately from video in TMPGEnc? theus 1 2008-11-24 16:38:17
Question TAW4 5.1 problem dravid 0 2008-11-21 18:55:29
Bug report TE40 CUDA not available to limited user accounts??? aesir 2 2008-11-23 20:06:34
Question TE40 Save Layout for Subtitles Howard Pasternack 4 2009-01-07 19:58:35
Request TMVS Two ways to improve Moviestyle Aaron 1 2008-11-21 02:33:54
Question TE40 Mark Mark 0 2008-11-18 20:45:07
Question TE40 CUDA Support for AVCHD? stefan 1 2008-11-28 05:53:10

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 217 / 983 ]   Next > >>
Question - TAW4 - Adding Music to Video No.61578
bscheirer  2008-11-26 00:21:47 ( ID:jv8xyczmuxr )   [ Delete / Reply with quotation ]

I'm trying to add music to my video clips. I would like to loop the audio if the clip is too long. I can't seem to find a way to do this. I tried clicking Audio 1 and stream to audio 2 if necessary, but Audio two is then grayed out. Is this possible? Thanks.



Question - TE40 - Codecs No.58525
Jack  2008-11-25 04:00:15 ( ID:nilcwk.k/if )   [ Delete / Reply with quotation ]

Hi There,
I have trouble to encoding my video to VCD format, the result still have bad result of movie, what is the best codec for used under Tmpgenc

Thanks
jak


myself  2008-11-28 05:55:19 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

Why dont you try to output with the MPEG-4 AVC output template?.
good luck



Request - TE40 - mr No.58523
chugada  2008-11-25 00:48:08 ( ID:pp04j9rbirf )   [ Delete / Reply with quotation ]

Hi all ! Any ideas how to add 2'nd audio track or its not possible at all ???


myself  2008-11-28 05:53:55 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

At the moment I think this is not possible.
good luck



Question - TE40 - Can I make Tmpgenc accept AC3 5.1 audio? No.58519
Tonyh  2008-11-24 10:23:48 ( ID:dil/oc.rnjr )   [ Delete / Reply with quotation ]

I remember way back in Tmpgenc Xpress 4.2.3.193 I can import AC3 audio with full 5.1 channels by plugin TSP-AC3-1.3-install-EN. Now I do the same with Tmpgenc Xpress 4.6.2.266 but this time it does not accept 5.1 channels but just 2 channels. Does the new Tmpgenc Xpress supports old plugin? Or is there any other way to enable 5.1 channel support in Tmpgenc Xpress?


myself  2008-11-28 05:51:17 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

If my memory isnt bad, TXP4 does not support to output in Dolby Digital 5.1 in anyway.
good luck


old-hack  2009-01-07 19:49:26 ( ID:xlaelkhtbnr )   [ Delete / Reply with quotation ]

I create Windows Media Video output files in High Def (1920 X 1080) with AC3 5.1 audio using Xpress all the time. You might want to consider installing AVISYNTH, K-Lite Codecs Package, and Windows Media Encoder. All of these are free and support numerous codecs that may not be available in the standard installation of Xpress 4.0. Then you can output all types of video resolutions and audio configurations.


Modify_inc  2009-04-23 00:48:42 ( ID:ifkmfpme582 )   [ Delete / Reply with quotation ]

Yes you may be able to choose 5.1 surround under audio WMA 10 Advance, but when you check it in any audio receiver it will only register as 2 channel/stereo. They need to fix this issue as everything now days is in surround sound. What good is ripping your Blu Ray, and only to get it played back in stereo. That's a joke...



Question - TE25 - TMPGEnc says no DVD player software installed No.43722
12au6  2008-11-23 03:39:32 ( ID:4uzv/o7e10f )   [ Delete / Reply with quotation ]

I had TMPGEnc Plus 2.524.63.181 installed and working on my previous computer.
I built a new computer, re-installed, and re-registered the program. However
when I set up to encode an AVI to MPEG-2 the following error pops up:
"To playback MPEG-2 file, DVD player software needs to be installed on your system. MPEG-2 files cannot be played without such playback software" If I proceed on anyway the image does not show up in the preview window, and the output file only has sound (no video). I have a DVD burner installed, and I can play DVDs with either Windows Media player or Roxio Cineplayer (so that says I have a CODEC installed). I tried un-installing and re-installing the program.
Both the old and new computers are running Windows XP. Ideas?


Electriac  Home )  2009-09-02 13:44:36 ( ID:4sc4behnegg )   [ Delete / Reply with quotation ]

You need a better codec package try CCCP it is very good



Question - TDA3 - Can you edit audio separately from video in TMPGEnc? No.60819
theus  2008-11-21 20:12:03 ( ID:vr16f0/jioo )   [ Delete / Reply with quotation ]

Right now if I want to edit a dvd to get rid of unwanted words, I have to cut the video along with it. Is there a way to just mute several words without having to cut the video?


Bob  2008-11-24 16:38:17 ( ID:ucbus1wjjgl )   [ Delete / Reply with quotation ]

I don't know of any way to do this within TDA3. You could extract the audio from the video source and then edit the words out in the extract, save the edited extract to a WAV file, and then use that edited extract as the primary audio source instead of the original audio from the video source.



Question - TAW4 - 5.1 problem No.61577
dravid  2008-11-21 18:55:29 ( ID:28l9criqgvr )   [ Delete / Reply with quotation ]

i am having trouble with this trial software
i have a avi file that has ac3 5.1 sound but when i insert it into works it only shows it as 2 channel. i thought this new software was 5.1 compatible.

hope someone can help as i really was looking forward to buying this.



Bug report - TE40 - CUDA not available to limited user accounts??? No.58516
aesir  2008-11-21 14:25:18 ( ID:s3bbpyofedh )   [ Delete / Reply with quotation ]

I have installed the latest evaluation version of TMPGEnc on a Win XP Pro system, with a 8800GT card and nVidia drivers v180.48. Under the administrator account, it has no problem identifying the CUDA capable card and using it. However if I log on with a limited user account then running TMPGEnc gives a "insufficient geforge version" message, specifying that CUDA needs v178.13 drivers and above. Is this a bug?


tkrave  2008-11-21 19:51:07 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

I don't think it's a bug; the system requirements say that you need to run it under an administrator account.


aesir  2008-11-23 20:06:34 ( ID:doo.2pjlztm )   [ Delete / Reply with quotation ]

That's something maybe they should look into, I am interested in buying this for the company I work for, but I cannot allow users to logon to workstations with admin level access accounts, which is common logic I suppose. I don't think it would be so difficult as to make it possible to run under limited user accounts.



Question - TE40 - Save Layout for Subtitles No.58511
Howard Pasternack  2008-11-19 22:00:11 ( ID:pjwfaqlwora )   [ Delete / Reply with quotation ]

Is possible to save a layout for subtitles using Tmpgenc 4.0. There are ADD and DELETE buttons in the layout editor, but they don't seem to anything.


tkrave  2008-11-21 19:04:04 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

When I click on Add layout or Delete layout it DOES do something.

Clicking Add layout adds a new layout. By default it will be called "05: Layout #5". You can then edit the layout to whatever you want. Then, whenever you add a new subtitle, you can select Layout #05 from the Layout dropdown menu.


Howard Pasternack  2008-11-22 15:42:35 ( ID:pjwfaqlwora )   [ Delete / Reply with quotation ]

>When I click on Add layout or Delete layout it DOES do something.
>
>Clicking Add layout adds a new layout. By default it will be called "05: Layout #5". You can then edit the layout to whatever you want. Then, whenever you add a new subtitle, you can select Layout #05 from the Layout dropdown menu.

The problem is that the layout doesn't get saved. Once I close Tmpgenc and then reopen it, the layout is gone. I tried the ADD routine using both Layout #05 and a custom name, and in neither is the layout available in another session.


tkrave  2008-11-24 19:21:29 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

It only saves the layout for that particular project. So if you start a new project, you'll have to recreate your layouts.


old-hack  2009-01-07 19:58:35 ( ID:xlaelkhtbnr )   [ Delete / Reply with quotation ]

Demux the chapters information from your DVD or Blu-ray. Strip out the chapter names so only the time and text is left. Save it as a text file. Rename the text file moviename.subtitle. Then select edit and import subtitles to bring in your subtitle list.



Request - TMVS - Two ways to improve Moviestyle No.61234
Aaron  2008-11-19 13:45:40 ( ID:jbnzoowegeh )   [ Delete / Reply with quotation ]

I've just purchased MovieStyle and I'm generally pleased with it. The UI is straight forward, making encoding very quick and easy.

However, there are two areas where I think MovieStyle could improve:

1) Quality vs. file size is very disappointing. Using the iPod normal setting, videos look significantly worse than those encoded with Handbrake's iPhone preset using a 500kbps bitrate. Despite looking worse, the files encoded with MovieStyle are two and a half times bigger than those encoded with Handbrake! Is it the lack of two-pass encoding option? I don't know.

2) As video encoding takes a long time, I tend to set up batch jobs. What annoys me about MovieStyle is that there's no way to name the output files before the encoding starts. I'm left with a lot of "title 1", "title 1 (1)", "title 1 (2)" files at the end of the process which can be a pain to sort out.

Thanks!


tkrave  2008-11-21 02:33:54 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Regarding point #2, you can set the name for each file before you output, but you have to turn off the automatic encoding option. Once that's turned off, you can add your files to the batch list, set the output name for each file, then press Start to begin batch encoding.



Question - TE40 - Mark No.58510
Mark  2008-11-18 20:45:07 ( ID:0/./sf0cill )   [ Delete / Reply with quotation ]

I just purchased the software. However, the help feature keeps crashing.....so, I am turning to you for help. I have an MPEG2 .vob clip that I need converted to MPEG1 for use in Sanction. Can someone walk me through this? I tried using the multiplexer, however an error message comes up. Thanks in advance



Question - TE40 - CUDA Support for AVCHD? No.58508
stefan  2008-11-18 20:29:52 ( ID:hezhhxmufpl )   [ Delete / Reply with quotation ]

Hi,
Anyone knows of plans to support CUDA for AVCHD input files? Badaboom is already doing it.

thanks in advance
Stefan


myself  2008-11-28 05:53:10 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

The newest version has CUDA Functions but i dont know specifically if it support it, all you can do is try with the newest version.
good luck



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 217 / 983 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.