This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Hi when i go to convert some avi file si have it only converts the audio and not the video and i did try that envormental setting thing in a message i read and it then gives me erros that file isnt suported. What can i do?
thanks
if i got a bigger hard drive would that speed tmpg up? I have 21 gig now and i can get half a movie done in 12 hours or maybe 10 hours. would a bigger hard drive speed up the process? my other question is about pinnacle, is it any good or would i be wasting my money? what are the pro's and con's of it, if anyone knows. thank you.
When I split the Video from Audio, TMPEnc finishs the job at the half of the file, but without any message. 100% done, but only half of the file. Whatswrong here?
Chances are your source file has an error in it when TMPGenc gets to this it chokes. It possible it will recover if you give it time to finish if not you may have to encode using the new source selection feature you can deselect the bad source file spot this way.
After converting a Matrox DV avi from the Premiere timeline using TMPGEnc and encoding the audio using Export Timeline > Audio, when I put them back together in DVDit!PE, the audio and video are out of synch. It seems that the audio has one sort of false start at the beginning where it seems to start and then starts over. That seems to be the amoount they're out of synch. Both show 2:01:01 for duration but they seem to be out by a fraction of a second. Can anyone tell me what might have caused this and what can be done to fix it?
Sync problems are very common with captured files,you said there was a little glitch at the begining of the audio file ,that glitch seems to have ruined your audio file so I think you will have to do your audio over again,and maybe this time there wont be a glitch at the begining of it,but if they are still out of sync you can use a program like "mpegvcr" or bbmpeg or m2-edit pro"to multiplex the audio to your video but it has a feature that lets you off set the audio or video so you can sync them,but can you get program streams into DVDit?I learned my lesson long ago with DVDit and dumped it because it is way to picky with the files it accepts.........
Thanks for your reply. I had no problem getting the files into DVDit or ReelDVD (ReelDVD actually seemed pickier). I don't know where the glitch came from at the start but it seems to be the problem. I found sound I exported earlier that had no glitch and it synched fine. Any ideas what would have produced the false start on the audio? I used Export Timeline > Audio using entire project. The one without glitch came from a Ligos plug-in export.
Does anybody know why when I demultiplex an svcd file I seem to only get half the length of the original movie. Also when I downloaded the mpeg 2 codec as posted on this site, I get an error message saying it can't find a dll ( msvbvm60 ) I've tried downloading the exe file a couple of times but always get the same message. Any ideas. Thanx loads guys.
I'll start off by reapeating a reply I put in another post to you.
If your still using that EZ CD creator crap then get rid and download yourself a free demo copy of NERO from http://nero.com
It'll burn that SVCD without you having to convert it to VCD first, saving you time and quality.
I have a collection of avi clips that I have downloaded and want to encode them all to mpeg so I can burn them onto a vcd. About half of them are fine and I can encode them with no problems.
The other half however are causing more of a problem. The original files are about 100mb and if I try to encode them I end up with a 800mb file with no sound. I have found a way to get round this by ripping the sound with virtualdub and then selecting this file as the audio source but it is a bit of a long winded method, and there is no easy way that I know of to tell which files need the sound ripping and which don't.
Is there any other way to accomplish this through TMPG ie with a plugin encoder?
Load file, click Setting>Advanced, double click source range filter then check 'display audio'
The audio will be displayed in green under the display window. If it's blank then TMPG isn't able to decode the audio, so you will have to extract to a wav. If you see a green wave then TMPG can decode the audio.
Of course it is, for doing dvd"s 3000kbs is a little low for a max bitrate,the dvd standard has a max of 9.8mbs, but i wouldn"t go that high unless you want only an 1.5 hours per dvd disk,youshould try a "CQ" encode with a max of 6000kbs and a minimum of 500kbs with 75-100% quality,that should give you pretty good quality for dvd and still get a couple of movies on a dvd disk..What did you mean by "it didn"t work"?why wouldn't your file work,what did it do?With a max bitrate of 3000kbs should have been good for a svcd with a fairly small file size, that is if you didn"t check the "enable padding" box cuz that will make your file a lot larger than it should be....
What do you mean "shocking"?What do you play your mpeg files through?You better not be playing your mpeg files with "media player" cuz media player does not play mpeg"s correctly.Do you mean a jerky, stop start motion when you play it,That is caused usually by encodeing to the Wrong frame rate.Post the specs of your file(frame rate resolution ect) and we will see what we can do to correct your problem.....
I mean exactly that. post the frame rate and format of your avi file and what frame rate and resolution you are encodeing to.Because the jerkyness is usually caused by encodeing to an incorrect frame rate,and Im preety sure that it Doesn"t have to do with the "CQ" encodeing mode..That is werd that it plays better in CBR mode cuz most dvd"s are VBR ..You could allways try CBR but at 5000kbs and you might fit it on a dvd, but in reality you should be able to get more that one movie on a dvd disk,I do really high bitrate XSVCD"s with a max of 8000kbs and my movies are about 2.5gb each....
The xsvcd"s I make I don"t do with "tmpgenc" I use a different encoder for my mpeg2 projects.Tmpgenc is way to slow and the mpeg2 quality isn"t as good as the other encoder I use....
When I try to convert a SVCD to a VCD according to vcdhelp I run into a problem getting TMPGEnc to recognize my .d2v file. I have tried changing the environmental settings and I can't get it to work. I have tried to re-install both TMPGEnc and the VFAPI plug-in (on a different drive). When I extract the newly downloaded plug in I I am told the zip file is incomplete or corrupt. Please help.
There are a few reasons why this can happen,I"ll go through the most common,remember to not move or re-name any of the "d2v"or"vob" files or change any of the names of the files or folders in the path between "dvd2avi" and "tmpgenc",.And to make sure you have the dvd2avi vfapi plugin,and you can try copying and pasteing the "dvd2avi.vfp" file from dvd2avi to the tmpgenc folder..and if none of this works get the "vfapi converter" and load your "d2v" file into that and see if it makes a psudo avi file for you if it does then you can use that in tmpgenc but if it doesn"t then there is something wrong,maybe an error while makeing the d2v file..make another d2v file with dvd2avi and dont move or delete anything and try again I have never really had a problem with dvd2avi and I make Lots of svcd"s..
Wondering if someone could give us some pointers, I've got ashy's templates, had a quick nosey and was a bit puzzled. The quality was set at 1000 with 0 as minimum bitrate and 3500 as maximum. Could someone tell me wether my assumption is correct, that its up to me to decide through testing ( a minutes worth of film) what to enter as the minimum bitrate. I thought I'd be clever and use the bitrate calculator to work out how much it would be for CBR and then take off about 150 to compensate for a film with a reasonable amount of fast scenes. Unfortunately I regulary go over 750 mb and have to start again. Could someone tell me wether I'm on the right lines and what the quality setting is all about. I did a a test on star wars (136 mins) and decided that each minute needed about 10mb (1500/136), I changed to bitrate to 1200 (bitrate calc said 1367 for 136mins on 2 80min cds with 224 audio). Did a test for a minute, it seemed fine but in the end both files still ended up 850+mb , another night wasted. Any tips or examples would be much appreciated. Maybe I would be better sticking with CBR just because its easier for a beginner. Not very positive I know!!!
The minimum bitrate he set it at is right, haveing a "0" minimum bitrate is a good thing if you are looking for your file to have a small size,the encoder won"t actually go down to zero bitrate but it will go close for frames that are black or just have credits on them,haveing the bitrate set at zero minimum and 100% quality lets the encoder choose over a wider range the amount of bits to allocate to each frame.You dont want more bits than needed to make up your movie, you dont need 10mb per minute if your encodeing the credits at the end of a movie or scenes with no movement ,and that 3 minutes of credits and scenes with no movementin each movie can really add up, but for scenes with lots of movement there is enough bits there to do the job...
Can anyone help me figure out why the sound cuts in and out on the vcd i made?
I encoded the divx avi to mpeg1 and it sounds fine if i play it on my pc but it sounds very bad after i put it on disk. I'm pretty new at all of this, but it is the 1st time I've encoded a divx and the 1st time I've had a problem such as this.
THX
It could be the format of the audio or the frequency or the bitrate of the audio.For the audio on a vcd to play correctly in your dvd player the frequency has to be 41000hz, and the bitrate shouldn"t be lower than about 96kbs...