This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Having problems opening mpeg2 files after a system re-install.
The "Ligos MPEG-2 Decoder" always seems to fail on the file I want to open.
And the "Cyberlink MPEG-2 Decoder" open the file as half height! (720*288 instead of 720*576)
As ideas? What else could I try? It worked fine before the system re-install but i couldn't say which codec was used before! Does the ATI DVD player install a useable codec? If so that could be it as I fucked up and installed DX9 before I tried to install the ATI DVD player and thus the ATI DVD player refuses as it keeps on moaning about DX8 not being insrtalled ;-).
You should not use any MPEG2-DirectShow-Filters for Converting MPEG2 because they are all working in 16 Bit-Color-Space, what drops the possible Quality of the Video. Use DVD2AVI to create an .d2v-Project. That will give you the best possible Quality.
Yes, use DVD2AVI for source when encoding but it is still handy to have a decoder for working with MPEG files on the merge/cut tool.
There are different versions of the Ligos filter floating around. You system re-install might have enabled an old or incompatible version. Search the file system (and web) for other copies to try.
When using pre-2.57 TMPG, Directshow sometimes selects video/audio filter combinations that do not work. Use graphedit to make sure Ligos is both the video and audio decoder by default. Create .bat files to unregister offending filters until Ligos comes up. Example:
:: Unregister (/U option) a video filter
regsvr32 /U /S etxvdec.ax
thank,i have used DVDx for subtitle with video server package to connect tmpgenc,i have a subtitles but the quality of vcd is low more than encoding with dvd2avi and pursuit encoding with tmpgenc.can i do to inflate the subtitles in dvd2avi and subsequently encoding with tmpgenc video and audio separately?with the sub ripper can i do insert subtitles in a mpeg file(VCD)or i dont for the problem of synchronisation of audio and video subtitles?
PLEASE HELP ME
I have some files I encoded in DVD format for my DVD burner and I wanted to know if there's any way I can trim off some of it to fit onto my blank DVD? I checked out mpeg tools and all it has is formats for SVCD and VCD...but nothing for DVDs! isn't there a way I can get around this situation?? Please reply ASAP.....I need to know right away please!
When ever I load a avisynth script into tmpgn I get the following error " tmpgn performed and illegal operation, tmpgnec caused an invalid fault at kernel 32.dll" and the program shuts down. I have the readavi.dll properly loaded and even adjusted the vfpai values several times, but no luck.
This just started happening and I was able to load /encode them before.. I can load a avi with no problem. I tried uninstalling and reinstalling the program twice, but still no luck. Im using v 2.59 plus.
Thanks
John
I have downloaded Smartripper, DVD2AVI and TMPGENC to rip DVD to VCD. Trouble is I cannot unzip the TMPGENC. I know that you have to previously have the VFAPI plug in installed, but for the life of me, I cannot find it on the site. Please Help
Not haveing the "VFAPI Plugins" installed Won"t prevent you from Un-Zipping the File...Maybe the Zip File is Corrupted?? You can download the VFAPI Plugins from here: http://www.tmpgenc.net/e_vfapi.html ...
Hey I got the same problem. I think that it's because they gave us the wrong archive to download, or because they forgot to fill the archive with the program. It gotta be one of those two things. Maybe we should wait until they undate the site.
I used to like TMPGEnc, but since today I keep getting an error "Read error occurred at address .... of module 'KERNEL32.DLL' with ......
The error occurs at quasi-random moments, but always before an encoding job has started. Anybody know what's going on? It can't be a codec-issue, and re-installing Windows (ME in this case) doesn't correct it.
Does it do this Just with this File or with every file...The Problem could be that the File is Corrupted in some way which is Probably the case if the movie is a Downloaded movie...
The error occurs before opening any file most of the time. When lucky enough to start encoding, the program just hangs after about 30 secs. This happens with every file, so not only with downloaded files.
There is a bug in TMPGEnc. Some players have problems with VCD's encoded with TMPGEnc. The problem ist, that TMPGEnc wrong calculates the VBV delay in dark scenes with only few motion. I tested such movie with some encoders and a VCD standard. The great tool MPEGRepair delivered the results.
You can see the results in:
i downloaded an avi file who seems out of sync (images are a few seconds late) i check it with gspot and it says:
for the video format: 4CC: DX50 Name:DIVX5.0 (codec not installed)
for the audio format: 64kb/s Sample rate44100 hz.
Can that codec be the problem?
I installed the last version of DIVX but it didn't change anything.
Is there something i can do to correct my file before converting it?
If the Original AVI file is Out of Sync then the Mpeg file will be out of sync, and Correcting Sync problems can be very difficult or even impossible depending on the Type of De-sync you have..If the File is the same amount out of sync the whole way through the movie then it is possible to fix it By useing the "Audio Gap Correct" or Muxing the Mpeg together with a Muxer that supports adjusting the audio Gap like "Mpeg2VCR"...But if the Audio gets progressively out of sync as the Movie goes on then it is very difficult to fix...
Thank you for taking the time and trouble to answer. :)
Finally, out of frustration i just tried to convert it without changing anything. And, don't ask me how or why because i have noooooo idea, but the mpg file resulting is in sync.
And yes, i swear! i wasn't drunk when i tried the avi file! it was really out of sync! ;)
Have you looked in the "Vfapi Plugins" to see if the Mpeg2 decoders are listed there???In the Newer versions you should have either the "Cyberlink" Ligos" or Sony" Mpeg2 decoders listed and in the Older versions there will be a Plugin called "Mpeg2 Codec" or something like that...But if you still cant get it to load Mpeg2 files and you have the proper codecs installed there is only one other thing I can think of that might work is to De-Mux the Mpeg file and just load in the Mpeg video and see if that works...I have found the Tmpgenc decodes Mpeg2 files Quite slowly so you should get Faster Mpeg2 decodeing if you use DVD2AVI to decode the Mpeg2 file....
hi, yes I look in the afavi plugin, i saw only direct show that could read mpg files but i still cannot read it. I know i have cyberlink codec install somewhere in the system but did not show in the tmpenc. The mpeg tool working ok but when i use multiplex function the sound is out of sync.
It is recommended "good house keeping" to have separate HDD for video files, this I have for my captured files.
However, in TMPGenc there is an option to select the Temp file folder - by default this is the C:windows emp
I surmise this is not the best place - how does TMPGenc use the temp file - how big can it get? - Is it best to have it on a separate physical drive to the capture disk?
Advice and recommendation son this setting please.
The Temp-Folder is used for Multipass-Cahcing and for any temporal Information. Also for Muxing. It's a good Idea to put the Temp-Folder to the fastest Drive on your System. And if you are using Multipass-Caching, you need lots auf Discspace.
My current arrangement is that I have a multi- partitioned drive that has the OS on one partition and my video application programs on another.
It would seem logical that I allocate as much spare space on this drive (choose partition with plenty of space) because my other drive has my captured files and the old argument it that you do not want the HDD head to be "flying" from sector to sector while handling temporary movements of data.
How have you set up you drives and TMPEGenc "temp" folder?
When ever I load a avisynth script into tmpgn I get the following error " tmpgn performed and illegal operation, tmpgnec caused an invalid fault at kernel 32.dll" and the program shuts down. I have the readavi.dll properly loaded and even adjusted the vfpai values several times, but no luck.
This just started happening and I was able to load /encode them before.. I can load a avi with no problem. I tried uninstalling and reinstalling the program twice, but still no luck. Im using v 2.59 plus.
Thanks
John
Have you tried to Dis-Able the "Direct Show file Reader"..I know if you Just disable the Direct show you can load the AVS file in Tmpgenc without haveing the "ReadAVS.dll" Installed ..Well It works on my System...Useing Virtual Dub as a frameserver seems to Be a Bit faster than AVSYnth files....
I tried disabling direct show biut no go. I still had to install the readavs.dll just to be able to load the avs.Im not sure why all of a sudden Im getting these errors.