Hi

I have demux an Blu-Ray VC1 with tsMuxer into different files:
- one VC1 for the video VC1 1920x1020 in 23,9 fps
- two AC3 for the audio channels
- two SUP for two subtitles

In TMPGEnc Authoring 4, I want to create an BLU-RAY .
I import the source file VC1

So I user TsMuxer to create a TS file from just the video channel.
Now I can import it, add the two AC3 files and the two subtitiles (after converting in SRT with SUPrip), I can create the Menu.. the chapters.. etc

Everything is ok... until ...

I can't simulate the result ... neither output ..
I have an error :
the track xxxxxx invalid video pulldown mode ?

What does it mean ?
Why I can import, edit the video, but not output ?

Thhanks for your help anf for this great software

You may need to change the framerate of the track that is getting the error.

In the Source Stage, click on the "Settings" button for the track that has the error.
Then, click on the "Video" tab. Change the famerate to something else and see if that solves the problem.
If that doesn't work, try changing the display mode and field order as well.

Hi Vincent,

I have EXACTLY the same problem.
I have downloaded Grease which was 33Gb, and a separate Subtitles SRT file.
It connected just file.

I have version: 4.0.2.14
Everything goes OK until "Simulation". Will not run.
"Output will not run".

Everytime I get the "Invalid Pull Down" error.
I swiched to a lower bitrate like 20000 or 15000, as TKRAVE on the forum suggested to you, but nothing helps.

Maybe you solved the problem? If you did please tell me your solution.

Many thanks,

Jerry,
Netherlands

Hi

I have demux an Blu-Ray VC1 with tsMuxer into different files:
- one VC1 for the video VC1 1920x1020 in 23,9 fps
- two AC3 for the audio channels
- two SUP for two subtitles

In TMPGEnc Authoring 4, I want to create an BLU-RAY .
I import the source file VC1

So I user TsMuxer to create a TS file from just the video channel.
Now I can import it, add the two AC3 files and the two subtitiles (after converting in SRT with SUPrip), I can create the Menu.. the chapters.. etc

Everything is ok... until ...

I can't simulate the result ... neither output ..
I have an error :
the track xxxxxx invalid video pulldown mode ?

What does it mean ?
Why I can import, edit the video, but not output ?

Thhanks for your help anf for this great software

I think to import Blu-Ray VC1 into Authoring 4 is still not supported, that is why becomes error, thsi could be a request for them.
good luck

With TMPGEnc 4.0 Express, what would be the best quality settings when encoding from .vob to .mp4?

I'm a disc jockey and video jockey and don't want to use the .vob files as they eat more resources than the .mp4 files, plus I can save on hard drive space in going with .mp4. I don't want to lose much in the way of video and audio when converting however.

Starting at the first screen after loading the .vob file...I don't know what to select for "Clip settings"

Display mode: Interlace or Progressive
Field order: Top field first or Bottom field first
Aspect ratio: ?

Any help on settings is greatly appreciated.

I would not change anything in the Clip Settings unless you have to or want to force it to display differently.

The Format Stage is where you want to change your settings since these are your output settings.

Using 2 pass variable bitrate will give you the best quality, and a higher average and maximum bitrate will keep the quality high as well.

Thank you TKrave. ;-)

Is it possible to have Author 4 burn multiple copies of either a video file or an ISO file, and if so where is the setting??

Thank you

Automatically? No.

You'll have to do each burn one after the other manually. You can use the disc writing tool to load an iso or video_ts folder.

error message: insufficent memory during output process (blu-ray disc project)

i have vista x64 with sp1

8 gb memory kingstone

core 2 quad

(2x)3870x2 crossfired

Are you running other programs at the same time? How much hard drive space do you have?

I opened a support ticket for this. They came back and suggested disabling all multithread check boxes. In some cases, this worked.

In other cased, I've used Xpress 4 to convert the bluray m2ts to a BMDV mpg file then import it into Works 4 for the video source. Xpress 4 will not encode the 5.1 audio track as part of the bluray BMDV mpg. It will only create a 2 channel Dolby Digital audio track.

Then import the original m2ts file, if it only has DTS 5.1 or AC3 5.1 audio, for the audio source. Works will now create the bluray dvd without generating this error.

should be "BDMV" and not "BMDV"

Hi,
Excuse me for my English, I'm Italian...
I've many problem to install new version of TNPGEnc 4.0 XPress. I've the 4.1 version and I want to update it to 4.6 version. But when I try to do it, the installation tool say me that it's impossible to unistall the old version of program because int's impossible to find the .msi file. I try to search it in my computer... but I can's find it...
Please, can you help me?
Thanks in advance,
Maria

Have you tried using the Windows "Add or Remove Programs" control panel? Maybe you can uninstall the old version with that before installing the new version.

If you are still having problems, contact support:
http://tmpgenc.pegasys-inc.com/en/support/support.html

Please add the capability to output DivX Plus(TM) HD to Authoring Works 4

downloaded & installed TPMGenc 4 Xpress. On first attempt to start it says The Trial Period is Over, which is rediculous since it was just installed. I'm trying to run it on Vista32 sp1.

Has anybody tested TMPGenc Authoring works 4 under windows 7 beta? I tried several times but the program doesn't open at all after installation.

It probably doesn't work then. TMPGEnc 4.0 XPress also doesn't seem to work on Windows 7.

I was the user that posted that Xpress 4.0 didn't work in windows 7. Come to find out it was an issue with microsoft windows installer (couldn't get any programs to install one day) and the next time the error occured a helpful fix poped up from microsoft on entering a command line to edit the registry. Xpress 4.0 works great under Windows 7...both 64 and 32 bit versions.

I just upgraded my dvd authoring 3 to the new 4.0 Works and will report back on how it performs under windows 7 32 bit.

Just thought I would share with everyone that I am using both TMPGEnc 4.0 Express and TMPGEnc DVD Author 3 with DivX Authoring on a Windows 7 Beta 64 bit platform with no problems at all.

Would like to read comments from those who are using Windows 7 Beta 64 bit and have upgraded to TMPGEnc Author 4.

Allow me to answer my own question...TMPGEnc Authoring Works 4 performs virtually flawlessly with Windows 7 Beta 64 bit. Patience is not a condition I deal with easily which would explain why I went ahead and purchased this product this afternoon!

I say 'virtually flawlessly' because I did experience a minor glitch when creating my own background picture for the menu...the 'keep aspect ratio' option was not available to me. I eventually sorted it out...but I'm not certain how. Kept the finished result as a template...so hopefully will not have to go through it again.

Is it just me...I thought TMPGEnc DVD Author 3 with DivX Authoring featured an option to use NVIDIA CUDA 2.0 for encoding...yet I see no such choice in the current Works 4.

CUDA is only for 4.0 XPress; it was never in DVD Author 3.

But anyway, good to hear that it works well in Windows 7!

Thanks for the clarification regarding CUDA.

My 'virtually flawless' has now morphed into 'nearly flawless'!

Whenever I 'burn' a 2nd disc using the 'Disc Writing tool' I receive an 'error' message at the conclusion of the encoding...and the disc tray, which is checked for 'eject disc'...doesn't. However...when I remove the disc and put it into my external DVD Player...the Disc plays fine (if only I had known that the first two times it happened.) Just another quirk...I suppose...but I share this info because I think it is worth sharing.
--


I live alone in my heaven, in my love, in my song.

- Friedrich Rückert (1788-1866)

>I was the user that posted that Xpress 4.0 didn't work in windows 7. Come to find out it was an issue with microsoft windows installer (couldn't get any programs to install one day) and the next time the error occured a helpful fix poped up from microsoft on entering a command line to edit the registry. Xpress 4.0 works great under Windows 7...both 64 and 32 bit versions.
>
>I just upgraded my dvd authoring 3 to the new 4.0 Works and will report back on how it performs under windows 7 32 bit.
-------------------------------------------------------------
Still No Clue How it works under Windows 7 Please Help

Hi, can you please send me this fix by e-mail? I'm having problems when I execute TMPGEnc Xpress. Thank you very much...

>I was the user that posted that Xpress 4.0 didn't work in windows 7. Come to find out it was an issue with microsoft windows installer (couldn't get any programs to install one day) and the next time the error occured a helpful fix poped up from microsoft on entering a command line to edit the registry. Xpress 4.0 works great under Windows 7...both 64 and 32 bit versions.
>
>I just upgraded my dvd authoring 3 to the new 4.0 Works and will report back on how it performs under windows 7 32 bit.

I don't think Authoring work 4 and Xpress work under Windows 7

Can anyone over here "Claiming" to be able to run TMPGEnc Xpress 4 on Windows 7 64-bit actually give a method on how to accomplish this? Cause most of us are not able to run TMPGEnc Xpress 7 on Windows 7.

Especially Tarris ... I've seen you post in a couple of different threads that you were able to use a Command Line entry to make everything happen - mind sharing that magical command line with the rest of us??

Thanks.

Any Legit License will work with Windows 7.I tried them on Both 32 & 64 bit.

Cracked Version wont work with Windows 7.

Do we know when will TAW 4 be officially supported on Windows 7? I tried TE 4 and it works fine. I'm considering switching from Corel's DVD MovieFactory 7 to TAW 4.

Hello
im using windows 7 32bit and I can' get the trial to work.
I click on the shortcut on the desktop and it opens up, I click on Start Trial and i get this:
[url]http://marklajoie.com/bootlegs/Misc/error.jpg[/url]

I have a season of a cartoon series that is in avi format. I want to convert them to wmv so i can play them in my zune. I have successfully done so with the first few episodes but for some reason a particular episode is sativking at 99% with 2 more frames to encode. Is there something I can do to force it to finish or maybe just quick without the 2 last frames? I have tried stopping then encoding process and am left with a file that is 50 mb shorter than the rest of the episodes. Any ideas?

Dear Pegasys,

you may add support for TP0 files decoding simply by ignoring first 288768 bytes of the file. Than it can be handled as already supported TS file. Please contact me if you want to have sample of the TP0 files, typically produced by Homecast SAT receivers.

What about support for 2-pass XviD encoding in one step ?

Regards
Petr

Hi

Sometimes, we find forced subs in an subtitle stream mixed up with normal ones.

(Note: If we extract the subtitles to vobsub files and edit them with subresync, we find that there are both normal and forced ones.)

The forced ones are usually needed translations to our language (it is not english)

We need an option to include only forced subs, not all of them. This could be an on-off option once we have chosen the subtitle stream. Also, showing up if there are forced subs in a stream would help a lot.

Is anyone nows any workarounds for this forced subs issue, I would greatly appreciate it.

Thanks