This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I've been using Tmpgenc for quite a while now. I've encoded many files with it successfully. Recently, I'm encountering "illegal operation" error when encoding. I've read some queries saying that Windows Media Player 9 has something to do with it. I've been using WMP9 even before i used TMPGEnc, so I'm wondering if it is really the problem. I've tried reinstalling my Win98 but still i get this error. I tried the new TMPGEnc 2.510, but still same error.
Can you please help me? Thanks!
Ok heres what happened when i try to convert CD1 to VCD.
Ok i just used the vcd NTSC Templater that comes with tMPGenc.
I switch the aspect ratio to "4:3 525 line (NTSC)"
I don't enable any filters. Then it says:
Movie Info: 352x24029.97 fps / 44100 Hz Stereo / 214 min 57 Sec
Video Resolution: 352x240
Average Video Bitrate: 1150
Audio Bitrate: 224
Estimated File Size: 2150.02 MB
I don't understand why this happened... i never had any problem converting any other files. I Have also tried to convert just the video file by itseld.. It still goes up to 1800 MB so i know it's not a video problem.
I know this was lengthy but i wanted to be as detailed as i could. If anyone had this problem before and knows how to fix it please help!!
The file size TMPG is giving you is absolutely bang on for VCD according to the length of the movie TMPG has detected.
Standard VCD bitrate encodes at 10mb/min. Your movie is according to TMPG is 215 mins long that would give a file size of 2150mb which is exactly what TMPG has estimated.
The file size of the original has absolutely nothing at all to do with the output size whatsoever. It is the length which affects the output.
Are you sure the movie is only 2hr 20 mins? If so this is the problem. Try using the source range to select the start and end points of your movie.
If that doesn't help just ignore what TMPG is telling and encode the movie anyway, it should only be 1400mb if the movie is 2hr 20min long.
You could try running the AVI through virtualdub using the direct stream copy option to try and correct the timecode or just frameserve it from Virtualdub.
Same problem happend with me. Downloaded 2 DivX movies of 700 MB each and they result in a 4.4 GB Mpeg file. When I started cutting the Mpeg file the last changing image was exactly at the time the movie is supposed to end (142 minutes) and the rest is a static of the last frame. So I first cut off the static and then cut the rest in two for the 2 SVCD's or leave it for a DVD.
My problem is that I seem to be unable to get sound with the movie after creating a DVD-PAL project. 1 solved, 1 to go.
Hi can any tell me how to convert dvd file (the vob file) to other format.
I have read the furom that they can't convert because of the subtitle or multiple audio, and video that why it can't convert.
I know that I can use dvd2avi to create a good file.
but that take to long to format.
I remember there is the old version of the TMPGenc that can convert dvd to other format.
What when wrong, my TMPGenc can't convert from dvd to other format anymore.
I still remember that I did convert a whole punch of DVd file to the SVCD file.
This is crazy.
Don't know how to solved this problem.
Please don't reply if you can't solved this problem.
>I have read the furom that they can't convert because of the subtitle or multiple audio, and video that why it can't convert.
What do you mean? You mean you can't use TMPG to encode directly from VOBS.
> know that I can use dvd2avi to create a good file.
but that take to long to format.
It only takes a few minutes to create a d2v project file and a wav file with DVD2AVI then just load both into TMPG and encode as normal, so what's the problem?
This is how most people do it without a problem, so obviously somewhere you are not doing it right.
You Probably made a AVI file with DVD2AVI and that is why it took you so long, Instead of going to "File" to "Save AVI" you go to "File" to "Save Project" and save a D2V project File and load that into Tmpgenc...
if i encode some avi-file i have no sound at the resultfile.before i update the tmpgencoder to version 2.51 . And if i use other encoding-tools i have also no sound on the moviefile.
You Probably need to extract the audio from the AVI file and decode it to WAV, then use the WAV file to encode in Tmpgenc..Something like "AVI-Mux" works well for this...
All of a sudden the picture quality in Tempgenc looks washed out and appears the same way after encoding and playing back. Maybe this has been addressed before but I couln't find it. I tried uninstalling and reinstalling.
What do you mean By Washed out, has the Color Changed?? Maybe make sure you don"t have the "Angel Potion" Codec installed, this codec can cause Color distortion in Mpeg files on systems that have the codec installed....
>All of a sudden the picture quality in Tempgenc looks washed out and appears the same way after encoding and playing back. Maybe this has been addressed before but I couln't find it. I tried uninstalling and reinstalling.
There is an option un the Quantize matrix sectiion that allows you to preserve the IRE of your source video.
Output basic YCbCr
Enabled
Generally, you should select this option; it will preserve the original contrast of your source footage. If your source footage is high-contrast computer-generated animation, disabling this option will ensure its brightness and saturation remain within "legal" video limits. Also, some DV codecs seem to automatically compensate for this difference between video signal and digital colour range, which will make the resulting output seem too dark. If you notice the MPEG file looks darker than the DV original (the difference will be something around 8%), try disabling this feature and see if that corrects the problem. I will try to test different DV codecs to determine which ones are affected by this.
>Output basic YCbCr
>Enabled
>Generally, you should select this option
Well this all depends on the source and whether it not it has the required range also, if not like most AVI and the output is meant for TV it may become dark and the colours will not be displayed at the the correct ranges, blacks will become grey.
I would disagree and say CCIR601 is more suitable for most sources intended for TV to ensure the correct scale on the TV unless it is known the source has the full range.
I have tested this and have found on most occasions CCIR601 gives the closest representation as far as brigtness levels and saturation are concerned.
Thank all for replying. I still cannot get the picture to adjust to its original contrast setting. It still has the lack of contrast look no matter what mpg I load into it. I have tried all the various settings you have mentioned but nothing changed. The only other thing I have installed recently was DVDworkshop, ver1, but have since uninstalled it because it was giving me a kernel 32 error.
BTW..The mpgs play perfect in powerdvd.
Well, I adjusted the contrast settings in color correction and the picture improved about back to normal, so that was encouraging and it encoded fine. Now today, when I load files into TempGenc the picture came back to normal without any adjustments. I am clueless. Thanks again for the advice.
Hey all, this is sort of a TMPGEnc question, but not exclusively.
I've been using Graphedit to convert .ogm's to .avi's, but lately I've been having problems, so what I did was split up the video and audio, in order to have TMPGEnc recombine them. What I did in Graphedit was name.ogm>ogg splitter>vorbis decoder>wav dest>name.wav. Now, the .wav file seems to play ok in Winamp, but when I choose it as my audio source file in TMPGEenc, I get the "...can not open, or unsupported" message. Is there another program that I have to run the .wav through, so TMPGEnc will recognize it? The audio codec in the original .ogm file is Ogg Vorbic, btw.
You can try going to "Options" to "Enviromental Settings" to "Vfapi Plugins" and Raise the Priority of the "Wav File reader" , but if that doesn"t work then there Might be a Problem with the audio, maybe there isn"t a Proper Wav header in the File, Maybe try useing "Headac3e" to decode the Vorbis to Wav, "Headac3he" allways Makes Good Workable Wav files for me...
Given the slowness of this whole process, it would be great if there were a way to pause an encoding project and continue it later. I of course haven't a clue as to how difficult such a thing would be to program!
You can pause it ,Sort of, You can press Stop and when it asks you to abort encodeing you just don"t answer and the you can go do something else and later come back to it and Press NO , then the encodeing will resume like usual.But you can"t shut down Tmpgenc your you computer till later and start it back up..
I am trying to test tmpgenc on my new system which is a P4 2.53Ghz with an adaptater Geforce4 32Mb with windows XP (SP 1)
I am using Divx 5.0.3
I am trying to encode a 70 minutes avi divx file into an mpeg
And it is very slow, tmpgenc says that it will take more than 22 hours (with noise reduction in high quality mode)
I try before on a P3 800Mhz and it takes less time (16 hours).
Is someone can help ?
This sounds about right for the settings you are using. I doubt it used to take less than 16 hours with these settings on your P3 800mhz. On my P4 1.9 it takes about 28 hrs to encode a 2 hr movie using those settings.
Is it really necessary to use Noise rsdeuction in 'high quality' mode? This will more than double the encoding time. Do you even have to use it at all. What is the source?
If you really do need to use a noise reduction filter, why not try Virtualdub or AVisynth's filters which are much faster than TMPG and frame serve.
Also remeber that using the 'Motion search precision' in 'High quality mode' will also increase the encode time. Using 'Highest' will dramatically increase the time with no visible benefit.
Now that Avisynth 2.5 is stable and there are a lot of filters that support YV12, would it be possible to add YV12 support in TMPGEnc? The speed increase would be huge (I'd estimate 20-35% faster) since there would be no need to convert to RGB24 in TMPGEnc and then convert back to YV12 for the final MPEG stream. This YV12->RGB24->YV12 conversion is obviously not necessary and does lower the quality too.
Forget about this one? I'ts like banging your head against a wall.
I have asked this repeatedly many times now to no avail. Every time a new version comes out I hope for a re-write in the code which will use YUY2 decoding. I understand that this is a major thing to change in the code and is probably why support hasn't been added yet, but it's about time it was added.
I agree it would make a major increase in the speed and is one thing which is holding TMPG back.
Most codecs now support YUY2, so it's about time TMPG got with it and started supporting it.
I am trying to test tmpgenc on my new system which is a P4 2.53Ghz with an adaptater Geforce4 32Mb with windows XP (SP 1)
I am using Divx 5.0.3
I am trying to encode a 70 minutes avi divx file into an mpeg
And it is very slow, tmpgenc says that it will take more than 22 hours (with noise reduction in high quality mode)
I try before on a P3 800Mhz and it takes less time (16 hours).
Is someone can help ?
Take a look at your "Task priority" of "Option".
"When active - High priority" should be checked.
And notice that the filter "Noice reduction" in high quality mode will
take lots of time if the resolution of the movie is high.
this may sound weird... but usually i can always convert my files either if it's avi, asf/wmv or whatever to mpeg, but all of a sudden i can not convert most of my asf files... whats going on? everytime i try to convert an error pops up saying "TMPGEnc.exe has encountered a problem and needs to close. We are sorry for the inconvenience" can anyone help me? i tried converting some of the asf files that i've already done in the past with success just to test it out and the same error pops out (when it didn't in the past). can anyone help? have anyone even ever encounter this? HELP please.
Hi. I just started working with this program today. When I try to run a AVI though it, it finishes in about 3 seconds even though the AVI is over 5 gigs. Also, the .mpg it makes is 2000 kbs or under each time. I looked through the FAQ and I could'nt find an answer, any help?
I don"t know what the Problem is but it seems that Tmpgenc doesn"t like your AVI file..Try encodeing a Different file and see if that works,and if it does you then know that it is the File..