This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Can anyone tell me how to predict/control the size of the MPG when I convert from an AVI? I want to be able to fit a movie onto 1 CD. How do I make sure I keep the output file under 700 meg?
If you are useing the CBR encodeing method you can use a "Bitrate Calculator" to figure out what bitrate to use to keep the file under a certain size..But you can fit a LOT more on a CD_R than 700MB, on a 80min 700mb CD-R you can usually get about 795mb-802mb on CD-R..But if you are useing the much better encodeing method CQ(Constant Quality)then it is a lot of guess work and trial & error..but if you use the CQ method you can fit more on a CD-R with Better quality and use a Higher bitrate......
The ACM is the "Audio Compression Manager" so you probably have an incompatible audio format in your avi file, try extracting the audio from your avi file to a wav file with "Virtual Dub" then use that as the audio source..Tmpgenc does not like to encode compressed audio formats and sometimes causes errors if you try to encode a format that it doesn"t like....
I am creating a PAL compilation VCD using TMGGEnc to encode the .Avi to .Mpg and nero to burn.
The problem: I have various files of similar length (Around 25 mins / 180MB) I can not understand why they take vastly different amount of space on the VCD.
An example of this is file 1 takes 25mins of a VCD where file 2 take a whole CD! The file specs look the same to me
File Properties from Windows XP
File 1 - Audio
Duration:00:24:09
Bit Rate: 128kbs
Audio Format: Mpeg 3
File 1 - Video
Frame Rate: 23 frames/sec
Date Rate:125kbs
Video Sample Rate:24bit
Video Compression: Divx Codec
File 2 - Audio
Duration: 00:24:09
Bit Rate: 127kbs
Audio Format: Mpeg 3
File 2 - Video
Frame Rate: 23 frames / sec
Date Rate: 122kbs
Video Sample Rate: 24 bit
Video Compression: Divx Codec
(Using AVI Info the files specs look identical too!)
If nero is used to perform the encoding both files take around 25mins on a CD.
I cannot use Nero to do the encoding as I need to reduce the video size slightly (as the videos are subtitles and if encoded at full screen part of the subttles are lost) Nero's scaling method "Scale and Fit" Produces a very poor quality VCD
If you are useing the same bitrate and the files are the same resolution and frame rate and you are useing the CBR encodeing method and you have the "system" setting both on the same setting then they should be pretty close to the same size.. but if a 25 minute avi takes up a whole CD-R then you must have the bitrate set at about 4500KBS which is allmost high enough to make a DVD...another thing I noticed is that you are encodeing NTSC files to PAL format, this will cause Jumpy playback on your DVD Player and could cause the audio to periodicly go out of Sync with the video...And it might be possible that your audio could cut out cuz you are encodeing a compressed format to a Compressed format cuz Tmpgenc sometimes has problems encodeing compressed formats to mp2......
I have cheked the bit rates and they appear to be identical. The settings in TMPGenc also look identical for both (Thanks for the tip regardig Jumpy playback) I have multiple files with the same issue.
I wouldn't rely on TMPG to estimate the output size correctly as it's very often wrong.
No matter what the bitrate or the resolution of the source file as long as the two files are of same length and you are encoding using the CBR method with identical bitrates then the two files should be exactly the same length. There is no way that the last file is going to be that large. It is either an error or you have a dodgy copy of TMPG.
A standard VCD using CBR means 1min is equal to 10mb and that is constant for standard VCD so a 24min AVI should be 240mb in size.
ok, so i rip a DVD then use TMPGEnc with the DVD template to reduce the size of the movie down but how on earth do i burn it to DVD-R so it plays on a set top DVD player using Nero??????
First off if you want the dvd to have the features of a DVD like "menues" titles" & "chapters" then don"t use "Nero" to burn it to DVD-R, pluss Nero isn"t a good dvd burning program and I don"t think that it will turn the mpeg into a "Video-TS folder"..There isn"t much use burning to a DVD-R without the DVD features ,you might as well do a vcd, if you want the features of a dvd and want to burn it easily then use something like "Ulead DVD Workshop" you can download a fully functional 30 day demo from there web site at "www.ulead.com" but if you want it to look more profecinal then you can use something like "Spruce Up" or "DVDit"..which you might be able to find on the net if you look hard enough or kaaza......
Nero is a fine DVD burning program, I use it all the time, but you need your file to be in VIDEO_TS form first, and for that you need a DVD Authoring program e.g. SpruceUp. DVD Workshop is a fine program but it will expire on you unless you want to pony-up $250 for it.
SpruceUp will allow you to set-up your program as a "First Play" item; you don't have to build menus at all if you don't want to. It's a great way to go for simple recordings.
Go over to www.vcdhelp.com for advice on authoring.
But who needs NERO if you have an authoring program, and Ulead DVD workshop is a very inexpensive program you can get it for less than $50..but it is free on the net....
Minion, I would like to know where you can get DVD Workshop for $50!!! And if by "free on the net" you mean it can be readily stolen, well, why would you want to promote software theft here where Pegasys stands to lose from widespread acceptance of such behavior as well?
It has been my experience that Nero works more reliably than either DVDit or SpruceUp for burning DVDs.
when i try to multiplex (MPEG-2 Super Video CD [VBR]) a mpeg2-file with an audio stram i always get a "stream reading error" at the same position (37%). When i multiplex it with MPEG-2 Program (VBR)-Mode everything is ok, but i cannot burn the file as SVCD. What could i do?
Try this, after multiplexing it as a mpeg2/vbr load the file into the "merge & cut" with the "svcd" setting and name your output directory then click "run" and it should put a svcd header in the file, but this is a bug in the 2.57 version"s mpeg tools, try a different version, some authoring programs will let you burn a mpeg2 file without a svcd header on it,like "VCDEasy" and "Ulead dvd workshop"......
Explain your Bugs and maybe there is a solution for your problem...Most of the bugs I experience are in the "Mpeg Tools" but other than that Tmpgenc has worked flawlessly for me over the last 6 months......
I've been pretty good at making VCD's with chapters using Sefty's Guide. Last night, I wanted to make a SVCD of Lord of the Rings on 3 CD's. I'm uising TMPGEnc and encoded the movie in 3 parts, 750mb each, using CQ of 80, with the high bit rate of 2400 and a min of 900.
I used Chapter X Tractor to read the IFO and pasted the info into VCDEasy, but VCDEasy said "number of possible chapter entry points:1".
Is it because I encoded a non-standard SVCD with TMPGEnc?
I don"t think it has to do with the mpeg being a non-standard svcd file, it is probably a bug in VCDEasy or an error in the chapter list, you can try to put them in manually but this takes a while...sorry i can"t help much here....
I have been using TMPGE for some time now, and have an older version.
I have been hoping that the BATCH ENCODE feature would be improved upon eventually, where you dont have to create each "project" manually one-by-one to create a batch list- what I need to do is create a processing template and then just highlight or drag&drop a group of mpegs into the batch list to all by processed by the same specs.
Is this possible in the new version? I remember seeing a seperately written app for TMPGE that allows you to create the batch files- does anyone know where I can find a program like that that works well?
I think you can find the "Tmpgenc batch file maker" at "www.divxdigest.com"? or you can make your own template with the settings you wan"t all the files to be then you can load in each file and just load the template then save the projects ,it isn"t perfect but it is faster than doing all the settings manually for each file....
I checked out that program, but it doesnt do what I need- its specifically designed for making VCD's which is not what I'm doing. I need something where I can set all the parameters to output to MPEG-1 and then be able to select a large group of source files to run through those settings and tell it where to plop the processed results, thus creating a TBE file for tmpgenc..
I saw a program that did this on an australian site, but it never fully worked- does anyone know of a prog for tmpge like this? They really need to add this feature into the program...
What to do to get 1 movie on 2 cd's? Does tmpg make 1 file and does nero puts it on 2 cd's or does tmpg makes 2 cd's? Let's say a 700 mb movie which has to be played in a stand-alone dvd-player, preferably on 2 cd's (quality). Can I set the prog to make 2 files of 800 (cd-size)??
What you have to do is either use the "Mpeg Tools" to cut the file into 2 parts or you can use the source range to encode the movie in 2 parts, and get a bitrate calculator so you know what bitrate to use so you fill up bothe cd-r"s cuz it sucks haveing a whole movie that is say 1gb which you would have to put on 2 cd-r"s but only fill them 2/3ds of the way.....
Does anyone no of a fast and easy method for converting audio from a dvd into wav files but keeping them in there original tracks. So if a dvd that I wanted to encode had 24 tracks, I would end up with 24 wav files. Cheers.
The only way I know is to either use DVD2AVI and extract each audio track individually to wav but this isn"t very fast, or you can use DVD2AVI to "demux all tracks" then use a "AC3" Decoder to "batch encode" all the "Dolby Digital AC3" tracks to wav files, but if there are "DTS" audio tracks then there isn"t anything you can do with them as of now cuz I don"t think there is a "Dolby Theater Sound" decoder available to convert it to wav.....
I have somtimes the Problem that its impossible to open VCD-Standard MPG filles with the MS Media Player, in the same time its also impossible to seek in the file with the TMPGEnc. Somtimes it opens the same file, sometimes not - not logical. Is there a solution?
TMPGEnc is using the MediaPlayer. If a Movie is working with MediaPlayer, it works with TMPGEnc too, if it is not working with MediaPlayer... say thank you to Microsoft! ;)