I have a problem opening up this particular AVI file, as usual the 'cannot open or supported' error. It can open just fine using WMP. I thought checking the video codec it used might help but I cannot see it under WMP properties. It is definitely the video cause I can open the audio just fine. I tried increasing the direct show priority and it did not gives the same error but windows 'illegal operation' instead.

Any clues?

I would like to make a template that sets up everything for me... including the settings on the "Advanced" tab. When I save my own templates, these settings do not appear to be saved?

Thanks...

That is correct these settings cannot be saved which only makes sense as each input source is most likely to be different anyway so there is no point in being able to save these settings.
Most of the settings do not change when TMPG is shutdown anyway unless you change them manually or load another movie.

ASHY

Well... I'm trying to use TMPGEnc to convert videos that I extract from my TiVo to SVCD. They are all the same as far as I am concerned... too bad I can't make a template to automate the whole process.

Thanks for your reply... I guess I'll need to keep looking to see if there is an app that will better suit my needs.

I am trying to use TMPGEnc 2.58 on Windows 2000 with limited success. It often crashes after a few minutes of video has been compressed to MPG1 format.

Any ideas..??? Does anyone know of compatibility issues?

I do not have administrative rights on the PC, and am not sure if this is effecting the performance. It used to run fine under previous versions of Windows.... and I used to have an earlier version of TMPGEnc, and upgraded recently.

I am in a bit of a hurry to get some files sent out and need any advice... cheers.!!

Hey, my name is Travis.

Anyway, I have noticed that if I try and do anything in Win2000 that takes up memory Ram the Computer restarts. That includes Games or Video editing. If you have a good enough pc, I suggest keep on doing things in windows and It might be alright. I've had it where I'm playing games and I get a stack dump message. Or the system restarts. Also, I have kept on doing things on the PC that won't take up much Memory ram so that the PC doesn't Restart(somehow). Try surfing the net while it's working on it. Or maybe try a memory clear program. I haven't tried that yet. Let me know if it works.

I can tell you I have had Windows 2000 with Service Pack 2 (now Service Pack 3) and DirectX8.1b, last chipset drivers, and just finished today to encode a long mpeg-1 movie for DVD during 23 hours. Tmpeg 2.58. No problem. Browsing internet sometimes, copying files and answering mail when needed. No hangs.

Maybe if you weren"t Surfing the net abd downloading and running other programs it wouldn"t take you 23 hours to encode, it only takes me 6 maX for 2 hours of full res Mpeg2 ..

My comment was about stability. It lasts 23 hours because it is a 4 hours movie from a crappy VHS tape, and the needed filters to clean the movie a bit (SpatialSoften,msharpen from avisynth, scaling and Deinterlace in TmpegEnc for best results) makes the encoding more slow. If I use TmpegEnc noise filters it would last 36 hours, estimated by TmpegEnc. Possibly my occasional browsing during 1 day has slowed down the process 30 minutes or less, but no hangs ;) .
My computer: Athlon XP 1500+, chipset nForce with 512 MB DDR RAM.

I realized another detail. I am using my Windows 2000 with full Administrator rights. It could be your problem (some months ago, I had problems with TmpegEnc and user limited rights before).

I think I read somewhere that you can't have a different version of TMPG put on your machine if you have had a previous one. Does anyone know if that is true?

I just installed the same version on to a colleagues computer and it works just fine..... but that doesn't solve my problem..!!!!

I have this problem when I'm trying to convert. In the box where you pick your audio input and video input you have to then brwose and find your movie. Anyways I can pick my audio fine and it works. But when i try to put my video in there comes up this can not open, or unsuported. So I heard something about Raising the "Direct File Reader" but I can not even find out where i can raise that. Also is there any "Plug Ins" I can download and where could I donwload them.

Thanks

Russ

"Options" to "Enviromental settings" to "Vfapi plugins" and Raise the "Direct show" to "2"..

thanks alot minion, you made my life much easier

Hi Guys

I an new to this so it would save a lot of time if you could help me. In Options/Enviromental I rightclick on the Direct show and raise it to 2. It then places it self on top of that screen. BUT I still get the message can not open or unsuported when i try to open my avs file. Did I miss something on installation or what.

Thanks

Joe

When useing AVS file from AVISynth it is probably better to Dis-Able the direct show instead of raiseing it...What works with AVS files and Tmpgenc really well is "Link2 Tool avi wraper" but it is hard to find ...

Thanks for your fast answer minion

No i am using DVDx where i create the avs file but i still get the damn massege all the time. I have tryed to raise the direct and lower it and disable it. Any tip what to do next..


joe

Hi there,

Did one of you guys ever seen this error while writing the MPEG file?

"Write error occurred at address 00487142 of module 'TMPGEnc.exe' with 00229000"

This happened twice to me, after first installing the TMPGEnc-2.58.44.152-Free version. Does anyone recognize this error? I should have had enough resources free (>5G), both on my drive as in RAM (512) . The processor is an Intel P4 1.8Ghz.

I would be obliged for any good suggestions,

Ray

During the encoding process i keep on getting small error boxes, saying "Error -53740378 166992" and similar. WHat is this? how can i stop it?

Probably the Audio Data corrupt. Try to encode the audio with VirtualDub and
then use this wav-file in TMPG Enc.

You may first try to clear the box with the audiofile in TMPG Enc. if it works thats the problem.

See also vcdhelp.com

I want to make a Super Video CD with subtitles ... how can that be done ?

There is a way to do it with "Virtual Dub" but you have to get the V-Dub Subtitle Plugin,then you frameserve the subtitled avi to Tmpgenc,It isn"t a simple job actually it can be Quite difficult if you want it done right, it is especially Tedius if you have to put them in scene by Scene...go to "Vcdhelp.com or to "www.virtualdub.org/ to try to find a way to do it...

If you are talking about selectable subs then I would forget it as only a handful of programs can do this. One example is Iauthor, but seeing as most DVD players don't support SVCD subs there is little point. Your best option is to hard encode them into the movie.

ASHY

Actually I have done a few hard encoded subtitled movies myself using Virtualdub and wasn't that difficult at all.

There are certain pieces of software you will need to use with Virtualdub to synchronize the subs with the movie.
Most subs for almost any movie can be downloaded from the net and come in various fomats which can be converted to a usuable format for Virtualdub.

ASHY

I strongly sugests using DVD2SVCD, it does all the things needed for conversion of DVD titles to SVCD.
In the area of subtitles, it has the option of either selectable subtitles (SVCD format and CVD format) or subtitles which are permanent (part of the video).

You can get the program here: http://www.doom9.org/

When i have more than 1 job listed in the batch encode section, once it gets done with the first job the program completly shutsdown. Thanks

CDMan

Use to get the same problem as you stated - but if I select all (CTRL+A) all jobs and hit RUN - everything encoded one after the other.

try it.

HAND, l8r

A. If you have ever done more than 3 or 4 jobs in Batch encoding;
2nd file is something wrong.

B. If you have never succeeded batch encoding;
Your hardware(PC, CPU, RAM, HDD or whole system) is not stable enough to bear/endure the pressure of Batch encoding.

While batch encoding, it should not run any other task. Overclocking is out of question in this case.

make a folder for ur batch encoding and it will work
thats what i do .. cos i use to have dis problem

installed latest version 2.58 with plug in but cant display movie in screen when its encoding i have p4 system running on xp pro with nvidia gforce 4 graphics card which means i get no picture when its complete please help

Raiseing the "Direct Show file Reader" will probably fix it.."Options" to "Enviromental Settings" to "vfapi Plugins" and raise the "Direct show" to "2"...

I have a similar problem. I use a Matrox Marvel G200 in Win98SE to capture TV broadcast. I then use TMPGenc to encode to mpeg-1. The last version that can encode the video is 2.2.31.1.

Once the wizards appeared I can't bring up video. I don't get any error messages, and audio works...just no video display.

I tried the modifaction you suggested but it doesn't help.

Any ideas what I need to do to bring video dispaly back in latest version.

I have a similar problem. I use a Matrox Marvel G200 in Win98SE to capture TV broadcast. I then use TMPGenc to encode to mpeg-1. The last version that can encode the video is 2.2.31.1.

Once the wizards appeared I can't bring up video. I don't get any error messages, and audio works...just no video display.

I tried the modifaction you suggested but it doesn't help.

Any ideas what I need to do to bring video dispaly back in latest version.

Unfortunately I downloaded first only the program and forgot to download the install file. So I started TMPGenc and run it. It appears the message "30 days trial period has expired".

Also when I downloaded the whole stuff again and installed it properly, the message can not avoided any more.

Any hints ? I am working under WIN XP.
Thanks Alex

Have you Had a Demo Of Tmpgenc before??Cuz it you had another Version Of Tmpgenc previously installed on your system you can not have another one.They make it so you have to Purchase Tmpgenc after you have used the Demo once...

Quote from (http://www.tmpgenc.net/e_contact.html).
"Because of MPEG-2 licensing matter, we are not able to provide unlimited MPEG-2 encoding function for free, thus, TMPGEnc (which you can download from this website) has limited MPEG-2 encoding function because it is free."

As far as I know, according to MPEGLA, developper/distributer of MPEG-2 encoding/decoding have to pay if they distribute/sell such software/hardware, this is why TMPGEnc has limited feature.

Alex, you have choice, either buying TMPGEnc Plus, or look for another MPEG-2 encoder (although I do not know which is legal, which is not...).

I am not happy with MPEGLA, but I am also not happy with some software / hardware, or people who ignores copyrights and patents.

I am not the person who jugde who is right etc., but I recommend you to buy if you need MPEG-2 encoder.

I purchased TMPGEnc 2.8 and I'm using it in a Windows XP box. I have a bunch of .avi files and accompanying .wav files that were created in Speed Razor on an NT4 box using Matrox DigiSuite video cards. The files were saved as .avis at lossless compression.

Please tell me why when I select the files from TMPGEnc, an error states, "file (name) can not open, or is unsupported."???

I am in a huge hurry and need this problem solved!


Dick Kindig

Some knowledgeable saint could call me toll-free at 1-888-546-3441!!

Have in installed the vfapi plug-in ? If so you need to change the priority settings for Direct Show
Options>Enviromental Settings>Vfapi Plugins>DirectShow (change the number to a higher one)
This is a built in plug in for TmpegnC, if it does not work try raising the priority on any of the other avi plug-ins.

Thanks -

I found the spot in the software you mentioned, and the codec you mentioned is set at -1. However, I cannot figure out how to change that. Most of the list is zero, then that one at -1, and another one at -2.

This is so confusing and I MUST get it solved tonight!

Dick Kindig

Are you talking about the "Vfapi Plugins"??To change the priority you Just "Right Click" on the Plugin and then you can eother raise it lower it or dis-able it...

I've been having the same problem. Have tried changing the priority settings but to no avail. Is it worth going above double figures or has anyone else some other magic up thier sleeves?

Thanks,

H

Double figures !! you mean the priority of the Vfapi Plugins?? They shouldn"t go above 2 or so...

i have a avi film 600megs and i want to be able to play it on my dvd player,
i was told i have to encode it to a svcd or divx format i have downloaded tmpg and have no idea on how to do this,is there a step by step guide some were ty :)

http://www.vcdhelp.com/
goto this site, it has everything you need to know to make your own VCD's