Is coming up with CUDA error 4 when encoding any filters. VGA is Gigabyte GTX560Ti GV-N560OC-1GI latest drivers from NVIDIA

Do you plan to implement SMART ENCODING of H.264 stream in the future?

Best Regards
Arthur

Can I copy a menu from a DVD project for use in a new Bluray project?
If so how, or do I have to recreatethe menu?

The video clips, chapters, etc. will be the same.

Well, I did it by saving the DVD menu as a template. Then copying the edited video files from the DVD sesion to a new BluRay project. After that I based the BluRay project menu on the template saved from the DVD project. Only minor adjustments to the menus were need. Might not be the best way, but it worksed.

Media files were all at resolution appropriate to BluRay.

I use the "Source Wizard" to select a movie from a DVD, it then copies the DVD to a temporary file with a .dvddata extension. I then realize I've forgotten to select a subtitle track. How do I do this after the Wizard has done it's stuff? Do I have to start the Wizard all over again remembering to select the subtitle this time and wait for it to make the another backup?

D.

In reply to my own question yes you can change both subtitles and audio track settings. The Audio is simple as it is an option under "Clip Properties | Audio". The subtitles are a bit more hidden. They are in the "Clip Properties | Video" section. There you can select the Subtitle stream in "Video Properties" then click "Apply". Not exactly intuitive I would say!

D.

Hi,

Your program is really really good now that you've incorporated x264. I noticed that b-pyramid is set to '0' (ie, not active) even on the 'very slow' preset. This is major oversight. Please create a new preset (called 'Insane' perhaps?) which has b-pyramid=2.

hello
i'm an happy and old user of Tmpgenc
My video has a VBr from 21.500 to max 23.500 mbps (Sony Cx550)
I have always used in Tmpegeng full rendering setting it in contstant bitrate 22.500
Now i read if i use smart rendering option, Tmpgenc re eondode only parts of my video i have edited in Tmpgeng..the other parts will not be encoode.
It means the video keep the original framerate as i outputted from my videocamera?Is it right?..i'm wondering that becouse the setting in Tmpgenc for smart rendering is bitrate Vbr 1pass 25.000-30.000 and i cant change it.So is it sure smart rendering doesnt econde my video not cutted, or smarte rendering reeconde everything to 25.000-30.000 mbps Vbr 1pass?
I'm doing a blu-ray of course
Thanks u
emidio from rome

Smart Rendering will not re-encode your video. All you need to do is make sure your input video is compliant with your output format. So for Blu-ray, your input video would need to be a Blu-ray compliant MPEG-2. You will know if Smart Rendering is active if there is a blue "SR" icon on the clip thumbnail in the Source Stage.

Thank u for your answer Tkrave
I'm not changing anything in setting..and i keep smart rendenrind
but in the clips stay always FR and not SR
What is wrong?
thanks emidio

Do i have to check "Do not adjust this track size" to avoid full rendering?
i really dont understand why smart rendering donesn't work. My video is a mpeg file..

If the clips say FR when you import them and you haven't changed any settings, then your clips are not compliant with your output format in some way.

What are the specs of your clips? Framerate, dimensions, format, etc.?

Thanks
the original clip from my camera Sony CX550ve is a avhcd .m2ts VBR usually 21 mb framerate up almost 23 mb.for example a 14 second clip is 38,4 mb
If i convert it with Corel Videostudio Xpro 4 in a bluray format, then Tmpgenc recognize it for a SR.But i dont like to re encode the file in bluray (35.000 kpbs)..the outputted file is worsth than original.
I think Tmpgenc should let SR for original clip from Camcorder
If i click on "Do not adjust this track size" option, it will do smart or full rendering...?i think it render everything however
thanks

Sony and Panasonic cams output M2TS as AVCHD MPEG4. Authoring works 4 needs to convert the files to M2TS MPEG2. It would be nice if there was an upgrade that would pass the MPEG4 files.

Does anyone know if there is an upgrade to Versiomn 4 coming.

i really agree Rick
Besides it's a lot of time Tmpgenc doesnt' upgrade TWA
Indeed id' like Tmpgenc do a unique program for editing and authoring as most of software do it

they were showing an H.264 smart rendering demo at the NAB show last week. It's still in development but hopefully once it's finished it will be incorporated into their products.

I have 4 clips. 1 main feature, and 3 bonus features. Everything is working great, but when I try simulation and play the main feature then it doesn`t stop when the movie is finished. It`s just keep going to all 4 tracks is finished then it goes back to the menu. I do not want to link the clips, and in the settings for the clips I also choose the setting "Do not link the clips".

Is it possible to play the clips individually or not?

Are your 4 clips in one track? If so, you will need to place each clip in a separate track. All clips in 1 track will play them continuously one after the other.

If your clips are in separate tracks and it's still playing one after the other, there is also a menu option for track playback end action. I think by default it is set to play the next track once automatically. You will need to change it to go back to the menu after track playback ends. You can change this option in the Global Menu Options or during menu setup in the Menu Wizard.

Hi,

I've reinstalled TMPG Xpress 4.0 on a Windows XP, 64-bit, desktop with scads of memory. (I uninstalled the previous installation because it wouldn't ever retrieve the license. After uninstalling, I rebooted the computer, then installed the latest version, 4.7.8.309, and it [finally!] accepted my licence. I rebooted once more for good measure.)

When the program comes up, it verifies the license, initializes, then presents me with the Quicktime dialog box. Since I do not intend to use Quicktime, I select "Continue." The program seems to open (I can see the GUI for a split second), then suddenly closes. No error message is displayed. I can't seem to locate any log files for the program, but if anyone knows the name/location, I'd be happy to check that.

The program was installed to a non-default location, as I tend to install third-party programs to non-system partitions (the D drive instead of the C drive).

Has anyone run into this issue before? If so, how did you resolve it? I thought I'd check here before escalating this to Pegasys support, thinking that no problem is new!

I have a screen video if that would help anyone, but would need directions on how/where it should be uploaded.

Hell, I'm just happy I got past the license issue that's been dogging me for a LONG time!

Thanks in advance for your help!

John

I have a recorded training session between two people. The volume of one remains constant, but the volume of the other slowly decreases throughout the session. It's a conversation, so the audio is constantly mixed, and it is mono.

Which would I use to fix this, normalization or uniformization? Do either of them continually resample and adjust, or do they simply analyze the entire video and then apply one setting to the entire output?

Thanks in advance.

I want easy to use templates for HD playback on Apple TV. Where do I get a template for that? I see some templates for iPod, etc but not for Apple TV and the one for iPad seems to be only standard quality.
Thanks,

Nice try, but still doesn't come close to other products, in both speed and ease of use. Took almost 3 hours to encode an HD movie into MP4 AVC when my other video editor did the same job in 20 mins, with equal output quality, and smaller file size. Still no ATI stream support for GPU encoding

So...what are these other products? Maybe people would like to try them.

I actually did a little bit of testing before purchasing, and while I have a few video encoders that work much faster or a little faster, the fastest conversions were "harsh" or overly edge-enhanced, and the smoothness of the motion wasn't up to TMPGEnc levels.

With CUDA assistance, TMPGEnc is reasonably fast and a good balance between "Do you want it fast?" and "Do you want it good?"

- Dave

I have used 4.0 Xpress for years. My Canon video camera creates a new clip everytime the record button is turned on and off. Some of my projects have hundreds of clips. I upgraded to Mastering Works but when I try and import a folder from DVD, BD wizard I get a MTS warning and I have to click through every clip takes 20 minutes to import all the clips. I have the "when adding several clip" option set to do not display the editing window. Anyone know how to import multipule MTS files (Canon ACVHD) files all at once? This was not a problem in 4.0 Xpress