I use a Personal Cinema Nvidia TV/ Video Card with WinDVR to record shows.
The end result depending on choosing Good-Better-Best Setting on my recording, the resulting video is an Mpeg and depending on the setting results in the quality of capture. I have in the past used TMPEnc to edit the Movie to remove commercials, then remerge the saved Mpgs to complete the "edited" movie, is has been no problem in the past, I keep upgrading my version TMPGEnc, so I don't know if my problem is from the newer version. My problem is c:folder"movie".mpeg can not be opened, or is unsupported. I kept my last few recordings to the "good" capture setting, but the message still apply's. All other uses for the software have always worked fine. Please HELP!

Question - Mr

Answer - Mr

I had a SVCD I used TMPGenc to convert it to separate audio and video files, which both work fine. I am now using TMPGenc DVD Author to encode it to DVD format. This is for a client and they want the video this way. Anyway, I have tried doing this 3 times, and each time the video plays fine but every few seconds the audio goes out. Anyone have suggestions?

i recently purchased tmpgenc.
i would like to use it again, after having run the 30 day trial.
but there seems to be no prompt fr where to enter the number...
and no directions, other than going through registration on line
which does nothing to change status of software...

Thanks!
Cindy

If you perchased TMPGEnc. They gave you a number.
Write that number in something like wordpad then copy it ctrl and c, then open TMPGEnc and click registar then click your cursor in the registration line and press ctrl and v your number goes on the line, you can now run the prg to your hearts content.

Ralph.

Has anyone out there purchased TMPGENC (either author or encode)
after using the trial version?

How the heck do I get the software to run again?
It doesn't ask me to enter the license, and I've tried
quite a few different things... not much info on the web site.

MANY THANKS!!!!
Signed,
Frustrated!

P.S.
I had to switch browsers to get to the purchase page, so its frustration
on top of frustration.

UUmm...You do not register the Trial Version...The Trial version is Just that a Trial version Once it Runs out that is it....You need to download and Install the "Plus" version, that is the Version you register...So what you have to do is Click the Banner at the Bottom of this Page, then click" Download" and then "Tmpgenc Plus 2.5" and then you have it...and from there you will figure it out....Cheers

xvid looks like a realy good program and was wondering can i use it with tmp which would give a small but exerlent picture and can it be added to it instead of what it uses and how? thanks for info

i have a digital camera
with that i record in squeezed mode so that i can play if on my widescreen in the right aspect ratio
that work perfectly
but now
i want to encode a LOT of those dv/avi files
when i load a setting which works (i know for sure)
i have to set the source aspect ratio to 16:9 by hand for tmpgenc to encode the file properly
that works perfectly.
the endresult plays "fullscreen" on a widescreen tv and "widescreen" on a 4:3 tv
no problems there
but now i have to encode about 80 avi files
do i need to load then individually, set the right source aspect ratio and make a project file?
i tried adrew doyles batchfile maker but then i load the tbe file it make tmpgenc comes with an error "= after line 21" or somthing like that?

Where are you loading the .tbe?
You must load it as a list in the batch encode box.

It does work I have used it on several occasions. Maybe you are loading to many files in at once. Try it with a lower number of files

i am using Batchlister 3.0
i tried with 5 files but it gives me the same error;
"="is nessesary.per 21 line.

.tbe files created with tmpgenc viewed with notepad also look a LOT different from .tbe files generated with the batchlistmaker

for more info on the squeezed mode i am using look here
http://geocities.com/wunder01au/widescreen.html

again
when i load a dv/avi then set the source aspect ratio to 16:9 625 line (PAL)
the encoding works perfectly (widescreen)

the guy is not always right on that page but he can speak better english than me
hehe

I have the same problem and I cant seem to get the batchlister to work at home. I tried it at work with W98 and the test avi that comes with Ulead, and it worked, but when I duplicated it at home with proper avi type 1 files on Win2000 I received that error.

I have resorted to using Tmpgenc's own list maker using that tedious process of saving each file as a tpr.

A little working trick is to edit some of the standard things like Source Aspect in the Batch List view by clicking on each list item, which saves a bit of clicks because they same tab will load each time.

Cheers

The error is telling you there is a '=' missing from line 21.
It should look something like this:

JOB.MPEG.Video.Height = 576

I've just downloaded version 3.0 from the link below and it works fine with the 10 files I have used:
http://www.digital-digest.com/dvd/downloads/tmpgenc.html

thanks for the answer
i am using batchlister 3.0 too
but the output .tbe of batchlister and tmpgenc seem to be in a totally different format.
piece of batchlister 3.0 output;
object TTMPGEncBatchEncodeList
List = <
item
JOB.MPEG.Text = 'DV/avi 2 to SVCD'
JOB.MPEG.WizardCategoryName = '$$HIDE'
JOB.MPEG.WizardSubFormatName = ''
JOB.MPEG.WizardCaption = ''

piece of tmpgenc;
ÿ
JOB 020&c TPF027TTMPGEncBatchEncodeList 04List1601
Job.MPEG.Text06 33Job.MPEG.WizardCategoryName06 34Job.MPEG.WizardSubFormatName06 26Job.MPEG.WizardCaption06 ZJob.MPEG.WizardDescription06 ZJob.MPEG.WizardTargetMedia07"MPEGConfig_TargetMediaType_Unknown#Job.MPEG.WizardAutoCalcVideoBitRate10-Job.MPEG.WizardAutoC

so what version of tmpgenc are you using?

The line I'm refering to is in the .tbe that batchlister creates not the one TMPG creates.
The TMPG one is unreadable as you say.
I'm using TMPGEnc-2.520.54.163-Plus-EN

I have a Project in the Mix.

The Project has 40 Tracks.

Each track has clips arranged in order 1 2 3 4 5 6

When Playing Track 1.... I would like track 1 to play as follows

Track 1 Clip 1
Track 40 Clip 1
Track 1 Clip 2
Track 1 Clip 3
Track 40 Clip 2

All without repeating to add each clip to each track.

If the Clip is already recorded on one track and I would like to add it to another track also. Is there a way to insert it into the movie without adding to the bulk of the disk.

To give an example : Series Shows start with an INTRO episode. The it goes to the Theme of Show. Show plays and then End Credits appear.

Would like a way to Schedule track to play different order of Tracks and clips to create a movie from all the Tracks/Clips on disk without repeating.

Track Play Card would make this happen.
Select which clip would play first. Usually first clip any but for ease just like first play on DVD Author. Play Card would contain all clips from track.
You could then arrange Play card to play any sequence you want. You could even add another track/clip anywhere in the play card to play once and return.

Example: Track 1 Play Card
Clip 1: Play Next Clip : NFA <- No Further Action
Clip 2: Play Track 40 Clip 1 : Return to play next clip
Clip 3: Play Next Clip : NFA
Clip 4: Play Next Clip : NFA
Clip 5: Play Next Clip
Clip 6: Play to end of track

I understand it may be nessesary to only have 1 clip per track. That would not be a big problem but it would create a nightmare for the menu. Making the number of tracks to correspond to the Menu is much more easier than created 100's of tracks for each clip and having the system jump back and forth.

Even with very expensive Software that's a trick, which isn't easy. There are only 2 Programs, ehich are able to do such things:

Maestro and Scenarist

Background picture is loaded.. You are allowed to Zoom in on the picture to fill the background but you cannot shrink the picture to fit into the safe zone for the TV. Numerous pictures I have used required that I reduce the picture in Photosuite to enlarge it slightly in DVD Author. Want to ensure no picture is not displayed properly on TV. Mechanism is allready in program. Should be allowed to resize picture to ensure it fits TV Safe Zone.

These are more enhancements to program to ease creation.

Create Project to allow the insertion of Jpeg Slideshow and create a DVD based on pictures like Kodak Picture CD on DVD

Program works great on grand scale but would be nice to allow multiple menu for each track allowing multiple depth.

For Example:

Main Menu - Normal (First Play)
Track Menu - Normal (Allow you to select Play or goto another menu.)
Each Track should be allowed to goto Main Menu, Track Menu or another track menu.

Would benefit program greatly is being able to select what happens after each clip is play in the track. You are allowed to add as many clips as you want into each track but you cannot select whether to return to the main menu or track menu or any place else for each clip.

You can make these as enhancements and leave the program as is on default.

I totally agree.
I have been trying to customise my main menu to select two track menus and have a third option to start playing a track.
Other than that - Great software!

When a selection of # of Track Menus are made. The only background that is cloned for each additional track is Track 1.

Would like a template that allows different background pictures for each track. The only way to create that is to save it in the project file and keep changing the files.
For Example:

Main Menu : Background Picture - Mov or Jpeg for Main Menu is ok
Track 1 : Background Picture - Family Pictures
Track 2 : Background Picture is repeated in Theme from Track 1 due to Theme setting -- Want Background Picture to remain Picture of Family Member.

It would be great if Theme would tie a brackground picture to each track as seleted by Theme Menu. If 24 track menus are selected. You can select 24 background pictures 1 for each track. If no background picture was ever selected defaults to track 1 background

Need a setting to enable/diable Autotext formatting for Title in main & Track Menu. When using a background Picture with Title already there. There is no need for the Title Box or the autoformat for the size font. Made a template for the associated theme but am unable to shut off the autoformat.

Create Menu windows-> Etid bouton -> set font for all page
or
Set font color for all page
Haha, autoformat!

I recorded a DVD-R on my Panasonic HS-2. I imported the dvd into TDA. I now have a single track DVD on which I used TDA to insert chapters. I would like to be able to create a menu that would go directly from the main menu to the track menu to select scenes, as there is only the one track on the DVD. Is this at all possible to do with TDA?

Yes, it is. Just click on the Button "Menu display settings" and choose what you want.

Thanks

That does it, but I already burned by christmas gift discs. :-(. They'll have to navigate through the gack.

Dennis