There is a company selling a product called CopiesAnything. (copiesanything.com) for $50. They try to pass it off as a DVD backup program but it is actually a zip file containing freeware programs. Included programs include VirtalDub, DVD2AVI, and our beloved TMPGEnc free version. Derrow, the author of IfoEdit, which is also being sold illegally as part of this zip file, is trying to contact the company and get them shut down.

I am posting this because I am hoping TMPGEnc will take legal action and sue CopiesAnything. As a software developer it really disgusts me when someone steals someone's work and tries to pass it off as there own and profit from it.

For more information about this refer to the IfoEdit forums at doom9.org

I agree these poachers are just total a......s for trying to make money off other peoples hardwork especially when the software is given free by the original authors anyway and hope they get everthing that's coming to them.

I just hate scammers and these tossers are a damn nuisance to good hearted programers who develop good software then let us have it for free, then these gits come along and try and take the credit for it.
I just hope they get what they deserve and all the other DVD copying software which is just the same and uses free programs that can be downloaded quite easily.

If they wanted to make money from it the least they could have done is asked the authors permission to use the program and give them some of the profits.

How do you change the out put feild ... I know my source (DV PAL) is lower field..But to get the best result regarding compatibility with the stand alone player it is best that the target MPEG is upper !! Programs like procoder can do this but HOW on earth do I do it with TMPGEnc ????

>But to get the best result regarding compatibility with the stand alone player it is best that the target MPEG is upper
Who the hell told you that?

You should encode using the same field order as the original otherwise you will get motion vector problems.
Also it doesn't matter which field order you start with either upper or lower, it won't make a difference to your player or the TV just as long as it is the same as the original.

You will find the 'Field order' setting under the 'Advanced' tab, but I strongly don't advise swapping the field order.

I know that I should not shift the field order on my source that would make no sense ! as for how I got the information...the programmers of Procoder and the maker of videotools and my old Denon dvd player !

You can't change the Field Order of a Movie with TMPGEnc. All you get is jerky Motion.

(BTW: All DVD-Player should be able to play interlaced Videos with both Field Orders.)

If you really want to change the Field Order, use a Tool like AVISynth. It will work perfectly:

AVISource("myvideo.avi")
DoubleWeave().SelectOdd()
AssumeTFF()

This changes the Field Order from Bottom Field First into Top Field First.

I use Tmpgenc standard PAL-SVCD format to product mpeg2 file. When playing SVCD, the motion scene and object, especially with fast horizontal movement, is not very smooth. But the still scene is very good.

The source file is PAL 704 X 576 AVI file.

Could you pls tell me the reason. Thanks

Xwyang

Try changing the field order

What frame rate is the source, is it the same as the output? Is the motion jerky like regular little pauses every second or so?

Thanks for quick response.

Framerate of source file is 25, the same as PAL SVCD, and field order is right.

The jerky motion looks like cartoon film. Actually I cannot describe it in details. For your reference, I've uploaded the clip to the followed website.

http://hk.geocities.com/xwyang98/svcdtest.mpg


Xwyang

Thanks for quick response.

Framerate of source file is 25, the same as PAL SVCD, and field order is right.

The jerky motion looks like cartoon film. Actually I cannot describe it in details. For your reference, I've uploaded the clip to the followed website.

http://hk.geocities.com/xwyang98/svcdtest.mpg


Xwyang

Try changing the field order

Has this footage been captured with an interlaced camera?
Does the original AVI not have the same effect and have you actually played the SVCD on your set top player.

The reason why I ask, is because this looks like interlaced footage from an interlaced camera which will NOT look right when played on a progressive display such as a monitor, but should look ok on your TV.

This footage is from SONY IP220. It doesn't look smooth on TV

HI, Im using the latest version of tmpgenc plus, im trying to encode divx/xvid to svcd. The program starts fime, and ive used an older version b4 with worked 100%, but this time the encoding hangs i different places. Ive always used the nemo codec package, and i think i had the latest xvid codec installed, i just can understand why it freezes up. What environmental setting should i have, ive set direct draw to 2 and the rest to 0. Pleaase help

Mike

Is there an option in TMPGEnc to shut down the computer after the conversion is finished? I can't seem to find it.

Yep, File>Output to file>MPEG
The option will then appear.

I'm converting a Xvid file (640 x 480, 42925 Frames, 29.970 Frames/Sec, 145 KB/Sec, Unknown Format) but the quality isn't what the origional has, the images become blured/large pixils when transitions form one show or bright flashes of light occur in the video. Would like to keep the file an MPEG-1 so I can burn it as a regular Video CD

As you know, a standard MPEG1 has 29.97 fps.
I used a video capture card (ATI All-In-Wonder) to record TV programs. The result video file is of MPEG1 format and has 3 hours 5 minutes in length. The file can be played in Windows Media Player (WMP) with no problem. However, I found that the file does not have 29.97 fps. Here is how I found out:
I open the file with VirtualDub and choose File Information (see screenshot http://guest.54bb.com/images/20031002/4v95ik183wll.gif)

Number of frames in video = 237445
Total time played in WMP = 3 hr 5 min = 11100 seconds
Based on these data, the frame rate should be around 237445/11100 = 21.39 fps

However, VirtualDub shows that the file has 2 hours 10 minutes in length based on 29.97 fps. I tried to correct the frame rate in VirtualDub, but it resulted in video-audio desynchronization.

I tried to use TMPGEnc's MPEG Tools to demultiplex it. The result audio file (mp2) has 3 hours 5 minutes in length, but the result video file (m1v) has 2 hours 10 minutes. It seems that the picture motion of the result video file is faster than the original picture because it is now played at the rate of 29.97 fps.
Please advise if TMPGEnc can correct the frame rate to 29.97

You Probably Can"t.....Well Not with Tmpgenc or Maybe even at all, It seems that You somehow Really screwed up when captureing, it seems that you have probably Dropped a Whole Bunch of Frames and this is why when the Video is Played at 29.97fps the Audio goes out of Sync and why the Audio is 3 hours and 5 minutes and the Video is Only 2 hours and 10 minutes, Based on this Information you have Dropped allmost 1/3 of the Frames while captureing and there is no way to really correct it when there are that many Frames Lost....I also Have an All In Wonder Card and My Captures allways Turn out Great but I have a Pretty Fast PC and a extra 120gb Drive Just for Video capture ...Maybe if you explained what you are Useing to Capture with Meaning what software and and the settings you are useing and why you are captureing to Mpeg1 and your PC set up and what you are Going to do with your Files Like are you just going to keep them on your PC or are you going to Make a VCD or SVCD or DVD or are you going to Convert them to DivX or something else?? Maybe with more Information I can tell you how to go about what you are trying to do the Best way Possible but for this File I think it is probably Not a Keeper.....Cheers

Minion, thanks for your time helping me.
I used an All-In-Wonder Radeon Card and its accompanied software "ATI MultiMedia Center". I opened its Digital TV screen and set up Digital VCR function for "Video CD" quality. Then I started to record TV programs. The result video file is of MPEG1 format and has 3 hours 5 minutes in length. The file can be played in Windows Media Player (WMP) with no problem.

The size of the MPEG1 file is 1.8GB, so I am trying to compress the file into another format of smaller size. I tried to convert it into a DivX AVI file using VirtualDub. I also tried to convert it into a 350K bps RealMedia file using Helix Producer Plus. However, the result AVI or RM file was 2 hours 10 minutes in length because it was assumed that the original MPEG1 file were of 29.97 fps. Also, there was video-audio desynchronization in the result AVI or RM file.

The only way that I know how to find out the number of frames in a video file is VirtualDub (Do you know a better one?) So I open the MPEG1 file with VirtualDub and choose File Information (see screenshot http://guest.54bb.com/images/20031002/4v95ik183wll.gif)

Number of frames in video = 237445
Total time played in WMP = 3 hr 5 min = 11100 seconds
Based on these data, the effective frame rate should be around 237445/11100 = 21.39 fps

I have noticed that I can compress the file with TMPGEnc by changing the bitrate to 350K. But it seems to me that TMPGEnc supports 23.976, 25 and 29.97 fps only. It is because I used TMPGEnc's MPEG Tools to demultiplex it. The result audio file (mp2) has 3 hours 5 minutes in length, but the result video file (m1v) has 2 hours 10 minutes. It seems that the picture motion of the result m1v file is faster than the original picture because it is now played at the rate of 29.97 fps.
It does not work if the MPEG1 file has 21.39 fps.
Please advise.

Well you are Not going to be able to Do anything with this File, there are Just to many Dropped Frames...Maybe the Problem with captureing the Video is that you do not have your PC set up correctly for captureing Video or maybe you do not have a fast enough PC to capture to Mpeg...You should Have at least a 1ghz PC but preferably 2ghz+, you should have a seperate drive for Video capture and Not have any Programs running at all while Captureing Video not even Anti-Virus software, and you shouldn"t do anything with your PC while captureing video..and your Hard drive should be Defragmented before Captureing...But if you still have Problems captureing to Mpeg then maybe try a different Format like AVI cuz captureing to Mpeg is a Very CPU Intensive Operation....well good Luck

I don't understand your problem.

OK the audio has a reported different length than the audio, and the video seems shorter, this is likely just a quirk.
In all probability this MPEG is infact playing at 29.97 which is correct. 21.39 fps is not a standard capture frame rate and doubt very much that it even plays at this speed.
The easiest way to find out is to just play the MPEG in Windows Media player 6.4, everbody has it even on windows XP, then just look at the properties of it while playing. My guess is media player will report 29.97 or there abouts.

Does the MPEG video seem to play at the right speed when demultiplexed?
Also I don't understand why you are trying to correct the framerate from 29.97 if it plays ok and is in sync.
What Virtualdub is telling you is probably correct and the file is 2 hours 10 minutes, don't believe anything mediaplayer tells you about the length, it just isn't reliable.

Just whack this MPEG into TMPG and encode it at 29.97 and everything should be ok and in sync as long as the original is.

As for capturing to MPEG1 in the first place, this was a big mistake, use a better codec such as JPEG.

If the audio does in fact go out of sync when encoding then it is not the frame rate you need to alter, it is the length of the audio you need to shrink to match the video. Most good audio editors such as Goldwave and cooledit are able to do this quite easily and you can find info on this board how to do it.

>The easiest way to find out is to just play the MPEG in Windows Media player 6.4, everbody has it even on windows XP, then just look at the properties of it while playing. My guess is media player will report 29.97 or there abouts.
>
>Does the MPEG video seem to play at the right speed when demultiplexed?

While playing the original MPEG in Windows Media player, it plays ok and is in sync. The properties show that the vendered video frame rate is about 20 or 21.

After demultiplexed, the picture motion of the result m1v video file is played at faster speed than the original picture because it is now played at the rate of 29.97 fps.

Ashy ,I think that the Problem is that the Video is about an Hour Shorter than the Audio, that is why I believe that he has Dropped about 30% of the Frames, and Shrinking the Audio By a Whole hour to compensate for the Dropped Frames will probably not Sync it up either Cuz the audio shrinking method will only work if the Frames were dropped in a Consistant Pattern...When I Capture to Mpeg and Drop a whole Bunch of Frames the File will Play In sync But as soon as I encode the File or Demux it it goes out of Sync I think this is Because the Capture program some how Compensates for the Dropped Frames By dynamicly adjusting the Mux rate while Captureing so as to keep it in sync even though frames are dropped and the Audio and Video Lengths are Different, But when the File gets Demuxed the true audio and Video lengths are different, That is why I do not think this Particular File will Be allmost Impossible to Fix.....Cheers

Ok I see, it does seem like frames have been dropped and that media player is playing the file slower to match the audio.
I'm not sure how this is actually accomplished by the capture device seeing as the headers in the file are actually stating it is 29.97 fps.

My capture device and software drops audio frames to match if it drops any video frames to maintain sync and fps. I don't see how you can drop video frames, but not audio and still maintain sync.
I mean if that actual part of the video which has been dropped is not there then what is the audio going to match up with, does the screen just go blank for those frames that are dropped while the audio continues until frames are recovered again?

To me it just seems like a bad capture program/hardware which is causing the problem and is not properly seting the parameters of the output as it should at 29.97
The output frame rate should still be 29.97 if set at that whether frames are dropped or not. It is only the source frames which are dropped, the output frame rate can still be whatever was required and should remain so.

I think the only way to correct this is to adjust the frame rate to match the audio if it is indeed playing at 21 fps as reported by media player.

How you are going to accomplish this I don't know, rather than changing the fram rate with virtualdub have you tried to just frame serve the MPEG to TMPG instead?

>I mean if that actual part of the video which has been dropped is not there then what is the audio going to match up with, does the screen just go blank for those frames that are dropped while the audio continues until frames are recovered again?
>
>How you are going to accomplish this I don't know, rather than changing the fram rate with virtualdub have you tried to just frame serve the MPEG to TMPG instead?
>
It is quite hard to see the difference between a video playing at 21 fps and one at 29.97 fps. Both of them play ok and are in sync.

How do you frame serve the MPEG to TMPG?

I recently purchased a DVD Writer. I also have purchased TMPGEnc about a year ago.

Now that I am able to create backup copies of DVD movies on a DVD, how can I use TMPGEnc? Since I purchased TMPGEnc, I would like to continue using it.

One of the things I tried is to put 2 SVCD movies on 1 DVD. But even though most SVCD movies fit on 3 CD discs, 2 movies do not fit on 1 DVD. I think this is because the SVCD format contains an error routine of it's own and therefore the space on a CD reserved for errors can be used for the movie.

Unfortunately, I only learned the features of TMPGEnc I needed to make SVCD movies. Perhaps someone who knows all the features of TMPGEnc can offer some advice on how I can use TMPGEnc with my DVD writer.

SVCDs are not DVDs. You just can't burn a SVCD to a DVD disc. Your player is expecting DVD standard files, for example MPEG-2 720x480 or 704x480, etc with 48 sound. SVCD is 480x480 with 44.1 sound. There are SVCD header tricks around to try to fool the dvd player but I've seen many players choke when given these discs.

For settings try the template for dvd that comes with TMPGEnc. Adjust according to the length of the movie and according to what you deem acceptable quality. There is no one magic setting.

Remember to backup only DVD's that you legally own, and even that is a gray area depending where you live.

Video Guy

Pluss ...You do not Just Burn Movies to DVD you have to Author them to DVD which means you need a DVD authoring Program to Format the DVD Compliant file into a Video_TS Folder that then gets burned on to a DVD...As for Putting SVCD"s on to DVD It is Possible Because I have My Whole SVCD Collection Backed up on to DVD and all of the Disks Play perfectly But they have to be authored a Certain way and I only know of one DVD authoring Program that Properly Authors SVCD"s to DVD so they will play in Most DVD Players and the Audio has to be Resampled to 48000hz...Doing DVD"s is a Lot Different than makeing VCD or SVCD"s....

Minion is right it's perfectly possible to author a SVCD to DVD as long as it is done right using a few tricks. Most players will be ok with the disks, some may not, it depends on the player.
You can find info how to do it at DVDRhelp.com.

Many times there is actually no nee to re-encode a DVD movie at all. Once the the menu's are stripped a lot of movies will fit on to a DVDR.

Hi,
I've been fumbling with DVD Author Since couple of days No Doubt it is
easy to use and simple But as i've read in so many posts about audio/music
in motion menu thats right on property page of menu display setting there
is check mark for audio/music as a background music. but tried lot of times
dosent work at all. its a bug in programme or some sort of file system error
any idea
Best regards & thanks in advance

I've been trying all night to figure out how to add the title at the bottom of the screen, while the MPG is playing, I know how to add it while it's not playing but i would rather have it there while it's going, can anyone help please?
Thanks,
-Ryan

Your Question is Pretty Confuseing...What Title Playing Were?? Can you explain your Question in Detail???

What, do you mean subs?

You know how people put like on music videos "#@Dal.net" at the beggining of the video? Im trying to figure that out.

I guess they could be subs.

You you Just want like Text to be Played over top the Screen, Well most Full featured Video editing Programs have features like this and even some DVD authoring Programs but I do not know of any free software that will add Text over motion Video..When I need to do something like this I use something like Ulead Media Studio pro 7 cuz it has a Video Paint Module that lets you add text and other effects to motion Video and there are Many other but None that I know that are Freeware.........

If your intention is to add a simple logo to the bottom of the screen while the video is playing then all you have to do is use something like Virtualdub which has a Logo filter.
All you do is load your source into Virtualdub then add the Logo and re-encode. You will need to frameserve from Virtualdub to TMPG if you wish to re-encode to MPEG again.

hi i've installed the ac3 decompressor in winxp for a xvid ac3 dvdrip but the sound is muzzled up. the sound is like in slow motion. can anyone help or suggest other sound codecs to use???

This Is THE only one that even has a Chance of Working with Tmpgenc...If you can"t get it to work properly then you will have to do it the Old way by Extracting the Audio from your AVI file to Wav format with something like Virtual Dub or AVI-Mux, then useing the Wav file as your Audio Source....

Try disabling the 'Directshow filter' in the VFAPI plugins.
If that doesn't work then you will have to follow Minions advice.

I tried to convert a WMF-file into a MPEG-file with TMPGENc 2.59, however, the window on which one normally sees the film remained grey all the time. After completion of the conversion, the final MPEG also was only grey. What did I do wrong? Does one need a special plugin to convert WMV/ASF-files ?

Well it can be done But Tmpgenc will not encode the audio so you will need to extract the from the WMV/ASF File to wav format first and use the Wav file as the audio source...To get Tmpgenc to accept the WMV/ASF File you first have to have the latest Windows Media Codec installed, then go to "options" to "Enviromental settings" to "Vfapi plugins" and raise the "direct Show File Reader" to 2 ..This should get the file to load Properly...But other Problems can pop up with WMV/ASF Files because they are easilly corrupted in which case you might need to use a program Like ASF-Fix to fix the file....

PS: you can use something like DB Power AMP to extract the audio to wav format..