Hello!
I've heard the audio of an AVI file which I want to encode with the audio section of the settings of TMPGEnc and it played pretty good (certainly before and after the 17th minute), also the video preview is ok, but the encoded MPEG2 file (VBR CQ) played ok for only about 17 minutes and then the video is still ok but the audio begin to be heavenly distorted and out of sync.
The source AVI file plays the audio correctly all along before and after the 17th minute even on Windows Media Player...
Anyone knows why and how to solve this problem?

Many thanks for the help.

Extract the audio to wav file first with something like Virtualdub or AVImux04 then use that as your audio source.

I downloaded an AVI file and converted it to mpeg using the free version of TMPGEnc. When I tried to play it right after there was no sound? PLease help!!!

You Probably need to Extract the audio from your AVI file to WAV format useing something like Virtual Dub then use the wav file as the audio source in tmpgenc....

I was converting avi files to mpeg-1 with no problems. After I finished encoding I noticed one of the files had very low volume. So I decided to try and redo it with audio correction. When I went to the audio tab under Settings and enabled Audio Edit the program no longer records the video portion of my avi, which worked fine before I tried fooling with the audio. Now even if I try converting an avi without the audio editing (which worked fine before) it still does not include the video and creates the mpeg 1 file with audio and a black video. I have tried everything I can think of including going over every setting in this software with a fine tooth comb. I reinstalled the software, I restarted my computer. The only thing I can think of is this may be a codec issue, but I am new to this and not sure how I would know what codec I need to reinstall or how I can find out. Thanks for any help.

Well In the First Place if the Audio was too low you did not need to re-encode the While File again you just needed to re-encode the audio which would have saved a Lot of Time and Trouble...Well anyways this should get the Video back,Go to "options" to "Enviromental settings" to "Vfapi Plugins" and Raise the "Direct show" to "2"....

I have no idea how to encode the audio seperate when using a file that already is mixed audio/video. As far as the Direct SHow plug-in I do not have that, no idea where to get it from. I was able to get video on other avi's but the one file where the problem started I am not sure what happened, but I even created a brand new AVI since the original source was .rm and still no video. I finally found another program that would convert the AVI to an MPG but not encode it, then when I went back to TMPGEnc and I encoded the mpg that I just created the video was restored. Not sure why this worked. Anyway in the meantime I came across another AVI that had the same issue, 2 out of 20. This one I was able to resolve by recreating a new AVI from the original .rm file. Thanks for the tips though!

>I have no idea how to encode the audio seperate when using a file that already is mixed audio/video

Just simply select audio only in the main and encode screen.

>As far as the Direct SHow plug-in I do not have that

Everbody has this it's aleady part of TMPG, take a look again.

Correction:
Just simply select audio only in the main and encode screen.

This should say:
Just simply select audio only in the main screen and encode.

Hi I am wondering if you could help.

I am trying to convert an Xvid uncompressed pcm file to mpeg2.

When I use tmpg to convert to mpeg2 the result is that thevideo seems to stutter (i.e. seems to playback 5 frames per second instead of 25). Is it because its going from 23.97 frames to PAL 25 Frames per second?
What am I doing wrong? Help!

The Problem is that you can NOT Convert Frame rates useing Tmpgenc.....If you search this Forum you will Find a Few different Methods of Converting Frame rates useing Mostly Free software, But what I usually do when I have to convert Frame rates like this is use a Video editor like Adobe Premier or Vegas Video to convert the frame rate but there are other methods outlined in this Forum if you look.....Good Luck

To handle this is easy.
Extract the Audio-Part from the Video.
Open the Video in TMPGEnc. Use Settings for PAL. Don't forget to set the Framerate to 25!
Go to the Advance-Tab and set Do not Frame rate conversion to activ.
Encode the Video only.
Open the Audio-Part in BeSweet and use the Settings for 23.976 -> 25
Encode the Audio-Part.
Mux Audio and Video: All will be perfect.

Hey guys, you've always been so helpful in the past regarding mgp encoding, and I had another question about putting a title with TMPGEnc on my movies. Currently, I have my personal movie footage for my Web Site in MGP Clip's and I use Premier to put a Tag on them and convert them to AVI's (because Premier's compression software sucks for saving as MPG, can't set the bit rate) and then I use TMPGEnc to convert the AVI's back to MPG's. It sucks! Is there any type of plugin for TMPG that will allow me to put the title of my website on the movies, like a watermark?

Thanks in advance!
-Steve

Theres no need for all that encoding , re-encoding then encoding again, that's just a waste of time and quality.
There are a few prgrams out there can overlay graphics and titles on video, but are usually quite expensive.

You can do it for free with Virtualdub using it's logo filter. You can put a logo anywhere you want in the video then you just frame serve the whole thing to TMPG and encode to MPG.

If you intend to use MPEG2 as input to Virtualdub then you will need Virtualdubmod.

Well if you have Premier then you can add the Titles in Premier and use the Premier Video server to Frameserve the Project with the Titles to Tmpgenc, this way there is No rendering at all...Or you can Just render your Premier Project with the Titles as an AVI file then encode it in Tmpgenc..All versions Of Premier I own Have a Mpeg encoder that you can set up includeing the Bitrate, The New Premier Pro Has a Very Good Mpeg encoder built in.....

Hi all,

I'm going to be building a new system specifically for video editing. Was wondering if some of you could share encoding perfermance/system specs so I can gauge what I'll need.

Today I have Athlon XP 2000+ with 1GB of RAM. The system I'm specing will be a Dual Xeon 2.4Ghz with 4Gb PC2100. It will have 3 SATA disks.
1. 120GB 7200RPM 8MB cache for OS and other programs
2. 120GB 7200RPM 8MB cache for videos and temp space
3. 36GB 1000RPM 8MB cache for swap space

Anyone have a similar setup? How many FPS encoded?

Thanks

Dan

I wouldn't have the TEMP space on the same drive as the working drive. You should just use the drive purely for Video only, you don't want the heads moving back and forth between the TEMP and Video space on the drive which will ultimately slow down the process.

It would be preferable to have the TEMP space on the same drive as the OS. Also your not even gonna need the swap file at all, so I would just turn it off completely.
With 4gb of RAM, Windows shouldn't even touch the swap file. The maximum size a paging file can be is 4GB anyway.
Even with 1GB of memory it's unlikely the swap file would get used very much if at all.

If you intend to do any multiplexing then I would one drive for the source Video and Audio and another for the target file.

This is how I would do it:

1. 120GB 7200RPM 8MB cache for OS and other programs and TEMP

2. 120GB 7200RPM 8MB cache for Video and Audio only

3. 36GB 1000RPM 8MB for multiplexing target files.

This way the OS can quickly read and write to the TEMP and the drive for Video and Audio never has to dramatically move it's heads from one position to another, but can remain more or less static for improved performance.

Lastly 36GB is plenty for MPEG files which are only to be multiplexed and not stored on this drive.

In reality 4 drives would be best one for the OS, one for audio, one for Video and one for multiplexing target files, but that is extreme and the above config should give a pretty decent performance.

As for my specs:

P4 2.8 533fsb O/C at 3.2ghz
80gb 7200 for Video/audio and OS
40GB 7200 for Target files
512DDR PC2100 RAM

Encoding speeds from compressed AVI in TMPG at DVD resolution output is about 1.5x real time at 'High quality' setting.

Encoding speed for the same source in CCE is about 2 to 2.5x real time, at half resolution 352x240 CCE encodes at 7x real time and in TMPG it is 3 to 4x real time.

Hi all,

Has anyone had much success with MPEG source files and TMPGEnc? I'm pulling files from my ReplayTV, which are MPEG2 encoded. I'm then converting them to DVD. But every other tool I've used (outside of Adobe Premier) has very bad quality or fails during render. And Premiere is to slow (2+ DAYS for 2hrs of video) even though I have AthalonXP 2000+ with 1GB RAM. I hear the TMPGEnc encoding quality is excellent but it's also very much geared toward AVI source files. They say you can use a third party decoder to support MPEG2 source files but does this degrade the quality of the output or limit features of TMPGEnc?

Thanks

Dan

Hmm, I don't know who told you that TMPG is geared towards AVI as this isn't true at all.

TMPG will accept most formats just as easily as any other as long as it is correctly configured to do so.
TMPG has long supported MPEG,AVI,JPEG,Bitmaps and many other input sources even from other encoders such as Virtualdub and DVD2AVI and even Premier.

The new version of TMPG plus also has it's own MPEG2 decoder. If you have the free version then this codec seems to be the best to use:
http://www.marumo.ne.jp/mpeg2/ just configure it correctly and make sure it has the highest priority for decoding MPEGs in the VFAPI plugins.
You will have full use of ALL TMPG's features, TMPG does not limit third party codecs in any way.

As for Premier taking 2 days for encoding 2 hours of footage, there is something seriously amiss there, even a machine with half the speed of yours wouldn't take that long.

We are looking for products which can convert 1080i or 720p content into 720x720p format (non-square pixel) and then encode it in MPEG-2 format. Any info or suggestion is appreciated.

I wish to convert DV AVI files (exported from Adobe Premiere 6) into MPEG 2 files but TMPGEnc does not recognize the file format. Is there a plugin I can use? Will the Plus version recognize this format?

Thanks in advance.

Depending on the DV Codec used you would Either go to "options" to "Enviromental settings" to "Vfapi Plugins" and Raise the Priority of the "Direct show File Reader" or the "AVI VFW Compatibility reader" or the "AVI2(OpenDML) File reader" but in Most cases the "Direct Show" is Probably the best if you are useing a Direct Show DV Codec like the Microsoft DV Codec....

I encode AVI to MPG and have one problem with this process: the size of output file about two times larger than the sourse file !!!
How I could resolve this problem

This Probably isn"t a problem...The Size of your Source file has Absolutely no bearing on how big your Mpeg file will be...IT doesn"t matter if your Source file is 100mb or 1000GB what Matters is the Length of your Source file...If you are encodeing to a Standard VCD then the File will be about 10mb per minute of Source file, and about 20mb per Minute of SVCD and 40MB+ per minute of DVD....

Hi,

I'm a newbie and I keep getting the same error when I go from TMPGEnc to TMPG Author. Author tells me that the video sequence header is incorrect and to use the wizard in TMPGEnc to create the file. However whenI use the wizard it creates seperate audio and video tracks. What am I doing wrong?

Open TMPGEnc and Check:

Setting -> GOP Structure -> Output interval of sequence Header

It has to be 1.

thanks, that worked!

I'm attempting to encode a DivX4 movie to mpg, using the AVI2 VFAPI plugin. When I start the encode it gives me an error window that says "Invalid Pointer Operation". If I disable the AVI2 plugin, and use the DirectShow Multimedia File Reader, the file will encode, but seems to lag a bit. It also seems to blur a small portition of the screen near about where the subtitles are. I'm encoding a fansub episode of a anime called 'Naruto', so the subtitles are a part of the video stream, and not in a seperate stream. The other episodes I have encoded were using DivX3, and had no problem encoding with AVI2 VFAPI plugin.

I did attempt to search the BBS to see if this had been posted before, or if the AVI2 VFAPI plugin supported DivX4, but I was unable to find anything relating to this problem.

According to GSpot v2.21, the video has the following specifications, CodeC 4CC:DIVX/XVID , Name:DivX 4 (OpenDivX) , Runtime:00:23:05 (166,034 fr) , xy:640x480 (1.33:1) [=4:3] , BitRate: 842 kb/s , FPS: 119.875 , QF:0.023 bits/pixel. I think the Frames Per Second should read 23.976, since that is setting I encoded to mpeg with using the DirectShow VFAPI, and had no audio sync issues with.

Thanks, I really enjoy using TMPGEnc, it has a very easy to understand interface, and is a really stable program for me. I have had no problems with it except for the one listed above.

Download ffdshow as Decoding-Filter for DivX/XViD. It is much better than the Original-Decoder.

Thanks B_Racer, that fixed the blurring on the video.

Are you refering to the AVI2(OpenDML) reader?
I think this plugin is more suited to uncompressed AVI which use multi segments such as captured AVI.
I would stick with Directshow or VFW for DIVX or XVID.

Yes, I was refering to the AVI2(OpenDML)File Reader. The DirectShow Multimedia File Reader uses the codecs installed in your system to work with the video. I know this, because when I have the DivX5 'Disable Logo' unchecked in the DivX 5.1 decoder options, TMPGEnc will show/encode the DivX logo in the bottom corner of the screen, the same way MediaPlayer displays it when the file is played with this option unchecked. The AVI2 File Reader is TMPGEnc's internal avi filter that does not rely on any outside codecs, as far as I know.

I think I found out why the AVI2 File Reader was giving me an error. A friend had suggest that I try and change the FourCC header of the file. I downloaded, Nic's Mini AviC FourCC Changer, and ran the episode through it. For some odd reason, it told me that the FourCC Description Code was xvid, and the FourCC used codec was DivX. So, I changed the FourCC Description Code to DIV3, and tested it with TMPGEnc, with the AVI2 File Reader. Worked perfectly, and has the same video quality as the ones that I had previously encoded.

I want to thank everyone again, for trying to help me. I really appreciate it.

If you are encodeing a Divx file and you are useing the "AVI2(OpenDML)Reader" in the VFAPI Plugins still Means that you are Useing the DivX codec to decode the File, any File that is Compressed will have to use a codec installed on your PC to decode the File there is No way arround it...The AVI2(OpenDML) File reader Isn"t a Decoder so it is Not acting as a Codec .....

Minion is right.
No compressed AVI can be decoded without a relevant codec installed.
As Minion says the "AVI2(OpenDML)Reader" will still need to be fed a decoded input from an AVI codec such as DivX.
It is the structure and type of file that determines whether the "AVI2(OpenDML)Reader" can read the AVI not it's compression format.

If what you are saying was true we wouldn't need to install any codecs at all.