How do I stop the encoding and then resume it later on

I don't think you can really stop and pick up later but you can effectively pause by clicking on abort - but don't hit Y or N - this should work whilst the computer is on - just hit N when you want to resume.

hello all can anyone tell me the best way to cut avi and xvid films so they can fit on vcd .........thanks for all replys

You can either Cut the AVI files before encodeing to Mpeg with something like "Virtual Dub" or you can cut the mpeg file after it has been encodeing to mpeg with the Mpeg tools or with a Real Mpeg editor like Mpeg2VCR....

htanks for your he;p but were can i get hold of this software

Use a search engine like Google, With it you can find anything...

Hi,

I'm getting a problem with the Merge & Cut Mpeg Tools. Like some other posts on this site, when I try to edit the input video stream time frames I get a blank window instead of the time segment selection window.

This only affects one user on the PC, if I logon as someone else everything works fine. Previously I simply deleted the affected user profile and started fresh. This fixed it but is a big pain, as it has happened 3 times in 3 days now.

Any ideas?

Thanks.

How do you get vfp plug-ins to work? I've got the QT Reader.vfp and tried to convert a .mov file to mpg but I got the "Cannot Open Or Unsupported" error message.

Many thanks

Did you put the QT Reader.vfp into the TMPG folder?
Also go to the VFAPI plugins and raise the priority of the QT reader to 2.

ASHY

The QT Reader was put in the same folder as the tmpgenc.exe file. I've tried raising the priority to 2 as suggested and still no joy

Do you have the latest Quicktime installed???

I thought you didn't have to have QT installed for the plug-in to work - otherwise I might as well leave the file as a .mov

Of cource you need QuickTime installed, you would need it to Watch the File so Tmpgenc needs it to decode the file....

Hello,
I've TMPGENC free last version and PowerDVD XP installed.
Until now it was no problem to open a *.m2v file to resample it.
But afer I applied the latest patch for Power DVD, TMPGEnc says that it cannot open *.m2v files !
What can I do ?
I've tried to reinstall both software and before I install the patch, it's ok but after, the same error !
Please help me !
--
Fred

I don"t really know what the problem is accept that something is Blocking the Mpeg2 decoder from working Properly but you can easily encode any Mpeg2 file with Tmpgenc if you use DVD2AVI to make a D2V project File, this way is Faster anyways and I allways get Better results useing DVD2AVI...

Are you using Windows xp? You can try this workaround. Open PowerDVD xp and play any mpeg2 file. Pause it and then open TMPG. You should now be able to decode the file under TMPG. Hope this works for you. Happy encoding.

-Nobody-

Hey there, i hope someone can help me! I just started using this program and am pretty good with most programs and i cant figure this one out......i am trying to change an mpeg 2 .VOB file to a mpeg1 or 2 to go on a vcd or svcd. I have have some success with the trailer from the movie driven and i cant seem to get any other vob's except ones off that disk to work... i checked to see if the audio and video streams were the same and they were, the vob before conversion works just fine in power dvd for and vob i have saved..... Can someone send me any ideas they have about this problem? when i load the vob for the trailer of for example coyote it says its one second long but its supposed to be two minutes of so.

Hmm, you don't seem to have a clue about VOB files.

You cannot just copy a VOB directly off a disk to your hard drive or load it directly into TMPG. VOBs contain many streams which TMPG can't handle.

You have to use a program such as Smartripper to decrypt the VOBs first to your hard drive then load the VOBs into DVD2AVI and create a d2V project file and a Wav then just load both into TMPG.

I think you are going to need more help so go here www.DVDrhelp.com for more info.

ASHY

I downloaded free version of TMPGEnc 2.5 yesterday. Starting using today and got 100% through inverse telecine process and then got message that "MPEG-2 encoding has expired - can only supply 30 days limited MPEG-2 encoding function because of licensing matter." and can go no further. Am I missing something???? Please help. Thank you.

The Mpeg2 encodeing is only good For 30 Days and Only once, If you have ever downloaded the Program before at any time you can not use it again unless you Buy it....

Hi, I have an MPEG that's just over an hour long. I'm able to split the movie and I get the first 30 minutes. BUT when I want the second part which is 30:00.0 to 01:00.00 I get this weird format for the end: 01:00:00.00

I keep getting the error ILLEGAL MPEG VIDEO STREAM. I've tested it over and over even going sor far as to go from 30:00:00 to 35:00.00 to see if it has something to do with the way I'm formatting my time.

I tried using "LAST" but when I click OK it doesn't show up so I can click on RUN. I've never had this happen and it's very weird.

I've split many mpegs with no problem. I've even gone so far as to re-encode this mpeg but I can't seem to split it.

Anyone have any ideas on what's going on or have had this issue? I'm getting sick and tired of not being able to split certain MPEG movies I find.

Rich

The Mpeg Tools Only Officially Support Files that were encoded By Tmpgenc so don"t expect it to work with files that you didn"t encode with Tmpgenc...use a Real Mpeg editor...

I have a .wmv file that I want to convert to a mpeg2 file and import to a project in DVD Studio Pro 1.5 (Mac). I am able to convert the .wmv using TMPGEnc into a mpeg2 and view it using WinDVD4. Thanks to those that responded earlier about my trouble getting sound to work with the file. Because I am selecting to make an mpeg and not a m2v+wav file the conversion works and the animated clip plays.

However, when I try to import it into DVD Studio Pro the mpeg format is not recognized by the program. I have tried using QTPro and the mpeg2 encoder that is an add on to finish this conversion as is suggested in some literature. I can get the mpeg2 (as converted by TMPGenc) to play now in QT player with the encoder added, but there is no way to save it as a file that gives me that needed .m2v. As anyone dealt with this problem in the past?

TIA,

Bryan

If what you need is the m2v from the MPEG then just de-multiplex the file using the MPEGtools in TMPG.

ASHY

>If what you need is the m2v from the MPEG then just de-multiplex the file using the MPEGtools in TMPG.
>
>ASHY

ok alot of this is related to my never having done this before. I can get the M2V and the wav file. But that file has no audio when I insert it into the dvd studio program. DVD Studio Pro only seems to accept m2v (the guide I bought supports that assumption), so I am stuck with a odd problem, well to me it is odd. I can get an mpeg2 with sound and play the animated clip fine in QT with MPEG2 support added, but not import it to the DVD Studio asset file. Alternatively I can have an m2v that I can load in the dvd studio pro and view, but I have no sound file with it. I have tried adding the wav file and merging them in Studio Pro but there doesnt seem to be any readily apparent way to do that.

I suppose I'm at the point I should just ask what easy to use DVD authoring software there is for XP and dump the whole concept of using my Mac for any of it. But I would like to try and get it working as it just bugs me too much.

Thanks for your patience and your help,

~bc

You would Be Much better off useing a PC for authoring a DVD, Not because PC is better Just because there are Many more software titles for the PC..What DVD Authoring Program you use would depend mostly on your Needs, There are some Fairly In expensive ones like "Ulead DVD Movie Factory 2.0" that are very Basic they will Basicly just add Plain Menu"s and add Chapters and only accept Mpeg audio as the audio source, then there are some with a Few more features like "Ulead DVD Workshop 1.3" with Motion Menu"s and and animated Titles and AC3 audio support, then there are Some that they use to do Profecinal DVD Titles Like "Sonic Scenerest 2.7" or "Sonic DVD producer 3.1" that you can use to add all the features that retail DVD"s have Like support for 16 audio tracks and 36 Subtitle Tracks and other stuff you Probably wouldn"t use..Send me an e-Mail and I might be able to help you find a good one, But one thing you might not have tried is if the Program will only accept a File with a M2V extention then try renameing a Mpeg file with audio in it to M2V, maybe then it will accept the file...

>If what you need is the m2v from the MPEG then just de-multiplex the file using the MPEGtools in TMPG.
>
>ASHY

ok alot of this is related to my never having done this before. I can get the M2V and the wav file. But that file has no audio when I insert it into the dvd studio program. DVD Studio Pro only seems to accept m2v (the guide I bought supports that assumption), so I am stuck with a odd problem, well to me it is odd. I can get an mpeg2 with sound and play the animated clip fine in QT with MPEG2 support added, but not import it to the DVD Studio asset file. Alternatively I can have an m2v that I can load in the dvd studio pro and view, but I have no sound file with it. I have tried adding the wav file and merging them in Studio Pro but there doesnt seem to be any readily apparent way to do that.

I suppose I'm at the point I should just ask what easy to use DVD authoring software there is for XP and dump the whole concept of using my Mac for any of it. But I would like to try and get it working as it just bugs me too much.

Thanks for your patience and your help,

~bc

>I can get the M2V and the wav file. But that file has no audio when I insert it into the dvd studio program. DVD Studio Pro only seems to accept m2v (the guide I bought supports that assumption), so I am stuck with a odd problem, well to me it is odd

What do you mean there is no audio when the wav is inserted into the program? Have you actually tried to create the VOBs first and then checked them for audio?

You seem to be making some sort of error some way along the line here.

All DVD authoring software will accept WAV as audio input.
DVD studio pro clearly states it will also accept WAV,MPEG OR Ac3 audio. You must make sure the sample rate is 48000 khz.

If you still can't get the Wav audio to work, which is unlikely, why don't you use the utility which comes with DVD studio Pro to convert the audio to Ac3.
This will make the DVD fully compatible.

ASHY

Why does it not matter if I reduce the resolution (i.e. from 640x480 to 320x240) in the exported MPG1 filesize? should it not be half the size as well?
If i do want a file which is half the size, is my only option to reduce the bitrate?

No, it doesn't matter what resolution you choose. The file size will always remain the same if you are using a CBR method of encoding.

It is the bitrate that determines the size of any given file.
For example 1500 kb/s is 1500 kb/s whether the resolution is 320x240 or 640x480.

What I mean is that the same amount of bits are being used to encode the MPEG no matter what the resolution is. The only difference being the quality of the actual image.

At high resolutions the image quality will be better, but this means that you would also need more bits to encode the image and hence a higher bitrate setting to avoid blockiness.

A lower resolution means there are less pixels and hence less data in the image to be encoded therefore the image is less likely to have blockiness at low bitrates, but the image won't be as sharp or as good quality.


ASHY

When I convert a file from Dvix to MPEG the sound file does not play. How to I change the sound output to MP3?? I think it exports as a WAV file??

The audio in a Mpeg file in NOT MP3..And if you ended up with a WAV file then you chose the wrong audio Format, the standard audio format for Mpeg files is Mp2 audio unless you are makeing a DVD then the audio can be Wav,MP2 or AC3...

After I produced an d2v file from an vob file with DVD2AVI, tmpegenc. doesnt recognize the d2v file. It says that it is not supported. What did I wrong?

Make sure that you have the DVD2AVI.vfp Plugin installed in the Vfapi Plugins...If not then copy the "DVD2AVI.vfp" File from the DVD2AVI folder to the Tmpgenc folder..Then make sure that you do not delete the Mpeg/VOB files that you are encodeing and do not move them or rename them or do not moove or rename the D2V file....