This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
HYCXPCBA, a one-stop Chinese PCB & PCBA manufacturing factory since 2013. ISO9001, IATF16949, ISO14001, ISO13485, Rohs certificated.
As an EMS manufacturer, our service includes:
PCB Design
Components sourcing worldwide
PCB Manufacturing
PCB Assembly Manufacturing (SMT and DIP Assembly)
Box Build/Finished Products Assembly
Testing
No MOQ requirement, no high starting cost, your any OEM and ODM orders are all welcomed. Welcome to visit our factory and contact us for new projects! https://www.hycxpcba.com/about-us.html
Is there a way to shift the audio between the right and left, in a stereo audio track of a clip? I have some clips that are too far to the left or too far to the right and want to balance them.
General Introduction of Flexible PCB
Flexible PCBs (FPC) are the PCBs that can be bent or twisted without damaging the circuits, which means the boards can be bent freely to conform to the desired shape during applications. The material the substrate used is flexible, such as Polyamide, PEEK, or a conductive polyester film.
Our PCB Flexible Capability includes but not limited to what are listed below, as we are updating our equipments constantly to keep us on the cutting edge. If your PCB Flexible demands are beyond these capabilities, please contact us at sales@hycxpcba.com, we will respond you if we can do or not within 24 hours.
Please check the manufacturing capabilities of the Flexible PCB from HYCXPCBA
Category
Capability
Details
Board Size
Min（pcs）
1*0.5mm
Max (Pnl Size)
250*1200mm
Base Material Thickness
0.06——0.3mm
Board Thickness
0.1-0.5mm
Base Copper Thickness
1/3OZ——2OZ
PTH Hole Wall Copper Thickness
8-20μm
Blind Hole Filling Capacity Aspect Ratio (Hole Size: Hole Depth)
01:10:00
Blind Hole Filling Capacity (Hole Size)
50-150μm
Single Line Impedance Tolerance
±10%
Differential Impedance Tolerance
±10%
Min Track/Spacing (Double Layers Board)
Surface Copper Thickness：8-14μm
40/40 um
Surface Copper Thickness：15-20μm
45/45 um
Surface Copper Thickness：21-30μm
55/55 um
Surface Copper Thickness：31-40μm
75/75 um
Surface Copper Thickness：≥40μm
80/80 um
Line Width Tolerance
Line Width≤0.050mm
±.02mm
0.05mm＜Line Width≤0.15mm
±20%
Line Width＞0.150mm
±10%
Silkscreen
Silkscreen Character Min Width/Spacing
4mil
Solder Mask
Green Solder Mask Thickness Range
10~30 μm
Related Capacity
Dimension Tolerance from Line Edge to Plate Edge
±0.25 mm
Choose HYCXPCBA for your Flexible PCB
HYCXPCBA provides a one stop solution for all of your electronic manufacturing requirements with our experienced team and state-of-the-art assembly equipments under one roof in an inexpensive way, ranging from fast turnaround prototyping to high volume manufacturing. We have the capability to identify design and production issues during the prototype stage and solve these (in consultation with you) before mass production. Our turnkey or consigned printed circuit board assembly service is ISO ISO9001:2015-certified and RoHS compliant. We handle SMD, through-hole and mixed assembly projects. Look forward to cooperating with you, welcome your inquiry: sales@hycxpcba.com
Iam sorry about my english.
I have a motion menue.
The menue is showing after 27sec.
The button comes in 27sec but the 26sec before you can see
the highlight without the bitton.
The hightlight must comes in 27sec too, how can I do that ?
I just downloaded the trial and it seems I am not able to do the most simple thing. I used Adobe Encore for years to create customized menus. I have no desire to use any of the backgrounds or buttons that is provided with the program? How do I get my own background and buttons into a menu. I see that all Backgrounds have a .taw7bg extension and buttons .taw7btn. Is there a way to convert my images to these assets? If not, this ends my trial. Thank you.
Hi, is it possible to select a BGM track and have it play continuously over the entire menu, even as you switch between pages? I only can see where each page has its own BGM, so if you select the same song it starts back over every time the page switches
We are pleased to announce the upcoming release of the English version of TMPGEnc Video Mastering Works 8, the successor to TMPGEnc Video Mastering Works 7.
A preview trial version is available starting today!
The download version will be released on September 24, 2025 (JST).
----------------------------------------------------
The unrivaled video encoder takes your creativity to the summit.
----------------------------------------------------
Marking the first major update in six years, TMPGEnc Video Mastering Works 8 has evolved to the next level. The software now supports the latest formats, including AV1 and Apple ProRes, offering greater control and introducing a range of innovative new features.
As an all-in-one solution for video conversion, compression, and editing, TMPGEnc Video Mastering Works 8 supports a wide range of input/output formats, fast and precise cut editing, flexible editing modes, and detailed output parameter settings.
This latest version adds support for new formats and containers, including AV1, which offers higher compression efficiency than conventional formats, Apple ProRes, XAVC HS, MXF, MOV, and ALAC, meeting an even wider range of editing needs. HDR (High Dynamic Range) color space editing* and RAW editing have also been enhanced, further expanding creative possibilities.
----------------------------------------------------
Master total control and unlock a bold new dimension of innovation.
----------------------------------------------------
The brand-new "Smart Cut Mode" lets users instantly remove unwanted scenes with a simple drag action, while also allowing re-editing of cut areas, which is a first for the series. This makes precise, effortless editing faster than ever.
To improve the convenience and efficiency of editing based on user feedback, many enhancements have been made. These include a redesigned and strengthened editing interface, automatic subtitle transcription, multi-camera audio synchronization, hardware acceleration support via Intel oneVPL and Vulkan, and more.
Experience the next generation of video editing.
Evolved into an all-in-one encoding solution catering to both consumers and prosumers, it provides a more flexible and efficient editing environment.
Start creating your own Works today!
----------------------------------------------------
Main New/Enhanced Features
----------------------------------------------------
Further Expanded Input and Output Format Support
+ AV1 Input and Output Support
+ Apple ProRes RAW Input Support
+ Apple ProRes Output Support
+ Nikon N-RAW Input Support
+ XAVC / XAVC HS Output Support
+ MXF Container Output Support
+ MOV Container Output Support
+ ALAC Audio Input and Output Support
+ AVIF Image Input and Output Support
+ WebP Image Input and Output Support
+ 64-bit DirectShow File Reader Support
Enhanced Hardware Support
+ Added support for Intel "oneVPL", enabling hardware encoding and decoding on Intel, NVIDIA, and AMD GPUs.
+ Support for Hardware Filtering on "Vulkan"
+ Real-time CUDA/Vulkan Optimization, Eliminating the Need for Prior Performance Checks
Further Refined Editing Features and Interface
+ RAW Development Settings Support
+ Supports Separate Histogram, Waveform Monitor, and Vectorscope
+ Supports HDR Editing for Slideshows
+ Enhanced Gradation Function - Finer Control
+ Motion Blur Added to Transition Effects
+ Easing, Motion Blur, and Background Color Support in Slideshows
+ Added Video Frame Cache Settings
+ Added Undo/Redo and Keyframe Step Buttons to Player Controller - Customizable
More Comfortable, More Accurate, and Faster - The Cut Editing Window Evolves Even Further
+ Introducing the New "Smart Cut Mode" - Breaking Conventional Wisdom
+ Features Automatic Silent Section Detection and Cutting
+ Added Skip Playback Function - Plays Output Range Only
+ Easily Search Any Location by Hovering the Mouse
+ Added Bitrate Display to Current Frame Information
+ Automatically Restores the Last Edited Position
+ Fast-Forward Audio Playback and Scrub Option with Pitch Preservation
+ Preview Controls with Increased Zoom Magnification
+ Clip Registration and Cutting for Split/Selected Ranges
+ Support for Drag-and-Move Keyframes and Split Points
+ Supports Undocking of Panels, Including Player Controller, Clip Properties, and Preview Settings
Even More Enhanced Subtitles Filter
+ Supports Automatic Audio Transcription for Subtitles
+ Supports Rotated Subtitle Placement
+ Supports Top and Bottom Placement for Ruby Subtitles
+ Supports RTL Language Input
+ Supports Importing and Saving WebVTT Subtitles
+ Color Font Support
+ Supports Import and Export of Subtitle Files After Cut Editing
Some Other Improved and Enhanced Filters
+ All Filters Now Feature Presets
+ Enhanced Mask Filter - Easy-to-Use Range Settings
+ Color Correction Filter Now Supports Color Temperature Option
+ Newly Added Fill Filter
+ Newly Added Margin Addition Filter
+ Newly Added Upscaling Filter
Further Evolved Timeline Editing
+ Multi-Cam Video Audio Synchronization Support
+ Batch Clip Property Changes Supported
+ Supports Middle-Click Drag to Move Timeline Ruler
+ Supports Drag-to-Duplicate for Clip and Filter Ranges
+ Added Enable/Disable Option for Video and Audio Clips
+ Timeline Now Supports Custom Frame Rate Settings
+ Enhanced Pre-Installed Assets
+ Enhanced Text Caption Function
+ Significant Increase in Timeline-Available Filters
Output Settings Are Now Even Easier to Use
+ New [Reflect Source Information] Function Added
+ Added New Output Resolution Templates
+ Improved Custom Settings
Hi, I have a problem. When I encode a typical 1080x1920 movie using the DVD Template in Mastering Works, it adds black bars on the sides. I found a solution to change the size to 704x480 with a 16:9 aspect ratio, and it seems to work. The problem is that when I bring the encoded file into Authoring Works, the settings need to be changed to 704x480 to display correctly. That seemed to work until I tested the DVD's ISO in VLC. VLC uses a 4:3 aspect ratio by default. I have to manually change it to 16:9 in order to show it correctly. If I skip Mastering Works and just load my original movie, then I can click on "Ignore Black Bars" in the video properties, and everything's okay. I had used 704x480 before with other problems, and VLC and other computer players never had any problems displaying correctly by default. There's something in Authoring Works that's not adding the correct metadata. I need to be able to use Mastering Works to encode all of the files before I author them. Can somebody provide a solution or explanation?
This is driving me crazy, where is this menu?! In the online guide (precisely at this link (https://help.pegasys-inc.com/en/taw7/30325.html) it says that I can change these numbers, but I can't find this option anywhere"!
I've read at numerous locations on the web (seemingly generated by AI) that TMPGEnc Authoring Works 7 can output to an ISO disk image. It says one only needs to click on the Output to ISO button. Is this true? I do not see an output to ISO button anywhere in the Output section of Authoring Works 7. Is there something I'm missing?
Hello.
I need help. I have a track of song videos, say 30 videos. on the menu, each page of track 1 has 10 songs, along with next page, etc. All selections in the menu are 'Back to Menu' after playing. If I click 'Play All', it starts at song 1.
Is there a way to only have it play the 10 songs on page 2. without changing the end action to 'Play Next Chapter'? Like 'Play All' but only for the videos on that page (11-20).
I am wondering the same thing. I am on v6 and have been waiting for v8 to drop for a while now. I even emailed their sales dept back in February of this year asking about this and was advised to hold off on purchasing 7 and to wait for 8. I assumed that meant that 8 would be released in the near future. Was not expecting to still be waiting 6 months later but here we are.