I upgraded to Windows XP and downloaded TmpgEnc Encoder, put the vfapi files in the same folder and ran (tmpgencvfp_install). It can't even see the files i've made using dvd2avi in d2v format.. Help, I've done what your web site told me to do, anything else?

I just encountered the same problem in XP after moving the ripped files from one directory to another. Just as a thought, I re-ripped the files and everything was ok. It must have been the moving of files that confused things. Hope this helps...

Easy solution Matt. Just copy this file DVD2AVI.vfp from your DVD2AVI folder into the same folder as your TMPGenc.exe and your d2v files should be supported again.
Another point to anyone else, DONT move or delete any of the vob files or the d2v file until you have finished encoding or it won't work.

Ive been trying to encode The Lord Of the Rings Screener! Cd1 worked fine! But i can get the other 3 parts to work audio wise! Its all glichy and cuts off all the way through the cd!! Does anyone know how i could fix this?

tr to extract the audio as wav using virtualdub and change the freq. Sample rate to 44100Hz if not already.

Play the wav at the bits cutting out.

If it's fine then re-encode, if not then it could be a corrupted vid/audio stream

Techno

When I try selecting a .d2v file as a video source it gives me an error that it does not recognize it as a valid source. Please help

I had the same problem then I realized that i deleated the vob files after I made the d2v file,then I found out that tmpgenc uses the vob files to make the mpeg1/2 files,and keep the d2v and the vob"s in the same place.,and make sure you have the dvd2avi plugin in the enviromental settings of tmpgenc...hope this helps?...

ps:try changeing the priority of the vfapi plugins.eg:dvd2avi,

Hi! Guys:
Is there any one ever import a m2v file generated by TMPGEnc working probally in DVD studio pro in Mac?
I can import my m2v file to DVD studio pro, but I can not set a marker.
I can only play it from the beginning.
I think there must be a setting I don't know; setup for the output of mpeg2.

Thanks.

I am having a similar problem with this program as many of the people in this BBS. I am using the latest version os TMPGEnc. Whenever I try to encode an AVI into an MPG, it says "cannot open or is unsupported". I tried to used divx codec 4.12 and no luck. Then I downloaded 3.11 and no luck.

Can someone please help me?? Or give me a link to another codec?? I hear v5 doesn't work with this.

under Options>Task Priority.... I have set them both to highest also and it still isn't working. I'm using a 1.1 GHz Athlon with a 32 MB GF2. I don't get why its not working.

Have you tried

enviromental settings >> VFAPI plug in >>> direct show multimedia file reader and changing the priotity of that higher

is it avi or MPEG u r trying to encode?

if avi then set the avi vfw and the avi opendml to a higher priority

Techno

I'm new to this.. and just tried coverting an avi to a mpg It gets to 99%
Then I get an error msg
(error occured with audio decoding)
Help please

Extract the audio as a wav file or de-mulitplex it.

If it is an AVI or and MPEG1 file u are trying to encode, download virtualdub (www.virtualdub.org) and then open the file.

then open the media file.

Then goto file > save wav and type a name and hit ok.

Then open the video and wav in TMPGENC and encode.

This should work.

Techno

TMPGenc rocks for DIVX encoding. :o) Hay question do you know when the author is going to fix the display problem with AVI output selection buttons for Video and Audio codec selection? They barely show up in XP I can just see the outer edge which is enough to click on any way. Which settings do choose when you make your DIVX movie for video and MP3? ~best regards NewtronX

I replied to the other post! hehehehe. :)

Techno

Thank you :o)

I don't really know what that message means but if anybody knows how to get around that I would really appreciate the help. thanx

What Os u running? What are ur computer specs?

Techno

i have had the same problem-i just got the software and thats the one thing from keeping me going-i am using windows XP-

i have had the same problem-i just got the software and thats the one thing from keeping me going-i am using windows XP-

i have the same problem ,if anybody can help me with that ther is my icq number please leave me message ,idont have e-mail
icq#108766803
THANKS

Nevermind about the P3Package error, I got that fixed. All I did is i went into the options menu in TMPGEnc and I unchecked everything under the CPU column, so all you other guys that had the same problem try that. I am however having problems getting my nero to recognize the encoded movie as NTSC. I have tried everything today but still couldn't figure it out. Someone pleeeeeez help! thanx

ps for Techno, I'm running windows millenium and i have a pentium 3

>i have the same problem ,if anybody can help me with that ther is my icq number please leave me message ,idont have e-mail
> icq#108766803
> THANKS

read my reply, i hope it works for you because it did for me

This is completly weird.

In XP, use compatability mode.

I have:

HDD 1 = Windows 2000 PRO
Windows 98 SE

HDD 2 = Windows XP PRO
Windows ME

Try downloading and running TMPGENC again.

Remove ALL registry entries regarding TMPGENC

I also have a PIII 800EB

Can't think of anything at this time...

Techno

TMPGenc rocks for DIVX encoding. :o) Hay question do you know when the author is going to fix the display problem with AVI output selection buttons for Video and Audio codec selection? They barely show up in XP I can just see the outer edge which is enough to click on any way. Which settings do choose when you make your DIVX movie for video and MP3? ~best regards NewtronX

Thanks man.

I have no idea when Mr.Hori is going to fix this problem/if he is aware of the problem. Tried using compatability mode?

I do capturing and I then convert to MPEG2, encode a few times then to DIVX 3.11alpha fast motion 6000 bitrate. Now, people say u lose quality, well, the way I do doesn't!

But I got probs with TMPGENC and opening MPEG2 files.

I solved it but if I encode an AVI > MPEG2 and open the MPEG2 file then encode then open the MPEG2 file I just encoded, it won't open it! So I am trying to solve this problem. I hope Mr.Hori/pegasys can solve this problem.

Techno

>fix the display problem with AVI output selection buttons for Video and Audio codec selection? They barely show up in XP I can just see the outer edge

Try the recommended minimum screen resolution which when used with
a small font will show every button available.

>fix the display problem with AVI output selection buttons for Video and Audio codec selection? They barely show up in XP I can just see the outer edge

Try the recommended minimum screen resolution which when used with
a small font will show every button available.

Up until last night using TMPGEnc at normal quality it was taking me about 48 minutes to encode 45mins of film , since last night though every one that i have tried has taken almost 2 hours for 45 mins of film, I'm pretty sure that i have not changed any of the settings so has anyone any idea why i would get this sudden slow down

make sure ur background apps are disabled. The time can go up and down.

Make sure u got plenty of RAM and hdd space and a fast computer.

Techno

i have 576 Ram 12gb free h/d space and its a 1.6ghz ,

I disabled the preview in the hope that it would go back to the speeds that i had until last night but it doesn't seem to have helped any as i have just tried another 45 mins and its looking at taking 1hr 42 mins to do

(living in hope it will go back to the speeds of before last night :) )

Wierd.

Techno

Problem solved :)

what was it?

Techno

people downloading from me in Kazza.

I stopped the uploads and encoded 53 minutes of film in 22 minutes so it seems that i can download without a problem whilst encoding yet cannot upload without trebling the time it takes

I continue to get "cannot open or unsupported" error message when trying to convert a .avi file to an MPEG. I tried to set the priority higher as was suggested to another user. I set it to 50 and still get the same message. So far I have only been able to create a VCD from .mpg files. Can anyone help?

I would like advise with this too, I have a file that opens in version 2.53 but encodes with no picture, just sound, but put the same file in older version of tmpgenc and it will not accept file at all. I have all the correct codecs installed

is this a DIVX v5 file? if so, it is not fully supported.

Techno

I also have the same problem! I have tried various things that "techno" told me last night but still cant get them to work

what I do is turn your "direct show" to "2" and every thing else to "0" especialy the "avi.compatibility reader" and "avi.progect file reader" If this don"t work I don"t know what to say.....good luck

I have installed premiere 6.0, which can edit Captured DV by just installing a OHCI IEEE1394 card. The exported MS AVI clips can be played in the Media Player 7.1. However, TMPGEnc shows me that the file is not supported. I think I have the codec of DV Pal already but why I can't encode it?

If I convert the file into Indeo 5.1 then it would be no problem but the compression function is lost.

Is there any path to fix the problem? The solution seems close but I can fix it by myself......
Help me please. Thank you very much.

increase the avi vfw and the opendml filter to a higher priority in the environment settings in TMPGENC.

Techno

Thanks for your help, but the problem remains unchange. I have installed the plug-in, too. It is also helpless. Any idea?

I have the same problem.
Microsoft DV avi files can be open in TMPEnc when they have been captured with scenalyzer. But when cut and export from Premiere, they can't be opened.
However the codec and format are the same (dvsd).