This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
When I have 2 or more tracks, it gets to the output and displays Building Authoring Information... and then does nothing. It wasn't frozen, I could move the screen around but no hard drive activity or CPU usage. I left it there for over 24 hours and it was still on there. If I did both tracks individually, it worked fine. Very frustrating. Any help would be appreciated.
I purchased the DVD Author 3, but it won´t work... The output gets stuck and quits.
I saw that I had some codec problems with Premiere (I investigated the computer with a codec-searching program called Sherlock), so just to make sure I got rid of the problem I uninstalled Premiere temporarily. To see if I could get DVD Author to work without Premiere, and if the re-installing of Premiere would cause new problems.
But now with no visible codec-problems (with Sherlock anyway), DVD Author has the same problems. I re-installed DVD Author, and it made no difference.
I think that your source files are a DV-AVI type 1, when you encode
this kind of file ''No Stream Available (Error Code 0x80048001)''
message appears.
Have you installed a DV-AVI codec?, you must install a
DV-AVI codec, for be able to read this files.
Please try by installing a DV-AVI codec.
Here is the link that you can install then try. http://www.free-codecs.com/download/Panasonic_DV_Codec.htm
Also try to convert the DV-AVI file to type-2 stream
with DV converter.
You can try with this freeware converter, here is the link: http://www.videohelp.com/tools/Canopus_DV_File_Converter
After the conversion:
-Try again in the DVD Author 3 with the output file from DV converter.
I've successfully imported DV video from my camcorder into DVD Author 3 using the source wizard. I continually get "playback does not catch-up" when playing the video in the editor.
I *don't* have a problem when playing video in the editor imported from a DVD.
I think this happens with DV and HDV video. It just means that it can't play the video at normal speed for whatever reason. You can still edit and do anything else like normal, it just might take longer to navigate through your footage.
From my experience, 2 situations may cause the 'playback does not catchup' issue. One is when the partition when your program or data resides is severely fragmented. Use the Disk Defrag tool to confirm. Another is when the IDE ATA/ATAPI controller drivers are corrupted. This can be solved simply by reinstalling the drivers. In both situations, your harddisk will slow down tremendously. I use Nero's DVD Copy module to test the drive speed whenever such situation is encountered.
I purchased TMPGEnc Plus a few years ago, however, it fell into disuse for some time as I was doing other things. I dug up my serial number in a three year old text file last night and tried to register with it, but it is not working. The last time I used TMPGEnc, it required activation and the entering of the serial number was different (it was broken up in segments in separate fields). Do I have any recourse in getting it to work as I did purchase the software before. Thanks.
This would be similar to how TMPGEnc Express can read from a DVD file structure to obtain a source video. Ideally the MPEG Editor 3, which can output BDAV format, could also read source video from a BDAV format. Just trying to see if this is actually the case. Thanks.
I think you can import mpeg (.m2ts ,m2t) files created into a BD, but from BD H264/VC-1 and AVCHD is not possible.
I suppose because this software is only for deep edition and output of mpeg files.
I import a dvd in TMPG express 4 with 2 audio tracks. 1 dolby digital 5.1 & other 1 is 2.0 channel. But after i encode dvd output file have no audio. Even cut-edit mode have no audio. This problem only i got when i import a dvd with multiple audio. A single audio track dvd have no prob to work with Tmpg express. How can i fix this no audio problem at dvd import ?
I have a problem that seems to crop up once in a while with other users, but I have never seen a solution which works.
My .avi file renderer out at 720x480 NTSC standard digital, DV Type 1, is read into TMPGenc as 360x240. The same files are seen by Widows Media Player as 360x240.
I tried ALL the suggested fixes - none work and changing the size in WMP 6.4 refuses to save.
Okay, frankly I don't care if the file displays at 360x240, if it encodes properly. It seems it won't do that, though, as all the parameters are also incorrect - it says progressive, etc. instead of lower field first interlaced. I rendered out an uncompressed .avi and it reads in fine.
Can you help at all? I have been going nutso trying to fix this... I need to author this feature length DVD asap!
hello all i need some help on TMPGEnc Plus 2.5. when its done ripping a AVI 2a MPG there is no sound i've tryed 2 rip just the sound and the still no sound at all i've even have put if on a cd but still no sound.there is sound on the AVI befor i rip it but none after its been ripped....help help help help help
Sorry-a lil late but better than never.
I had that same issue with some avi audio years ago.
Get the audio decompressor ver 1.4 and decompress the audio to a wav. The decompressed movie file name will now contain .pcm at the end.
The file will be considerably larger until you reencode and recompress the audio (lame mp3 etc).
♫Ric♫
Good morning, i have downloaded the rel. 4.6.2.266 of TMPGenc Xpress4, but the Cuda doesn't work. I don't know if it's a bug or what. The Cuda toolkit and the drivers work, the SDK browser send me a message like this "Application not initialized (0xc0000135) press OK to continue".
I have 2 GPU 8800 GTS in SLI on an Asus Extreme Striker II, CPU QCore Qx 6700, DDR2 2 Gb COrsair Dominator 1066 Mhz and alot of space on the hard disks (6).
If anyone can help me can write here in forume or send me a meil to pasquale.dereviziis@tin.it.
Tnx a lot all, best regards
I also have a GTX 8800 and CUDA is not supported, will this chip be supported in the future as it is a CUDA chip ? so it seems a bit strange that we loyal GTX 8800 owners are left out !
I have a 8800 Ultra (also using the good old G80 core) and I can't use CUDA either, although every GPU in the 8000 series is officially CUDA-ready. I wonder why they didn't add support for the G80... Anyway, I hope they will support it soon.
I'm wondering if this is a limitation of TMPGenc or of Nvidia? Can't G80 cores normally support CUDA?
And here's on big suggestion to TMPGenc 4.0... Give us the option of removing CUDA from the deinterlacing filter and just using the CPU for deinterlacing. CUDA is helping some of my filters, but is slowing things way down on deinterlacing.
I ended up turning off CUDA support because it makes encodings take longer on my system! lol My specs: QX9650 quad at 3.83 ghz and XFX 8800 GTS-512 G92 (2xSLI) with driver 180.43. Oh well.
Also, most of the time with CUDA on I keep getting an "Invalid sample format. (error code 0x80048002)" at 99% done of an encoding (any source file type) when it goes to use the video fade-out filter at the end!
Something to do with Cuda 2.0 SDK. "Unfortunately Cuda 2.0 only supports Cards that have the compute capability of 1.1 and higher"
Computing capability 1.0 - it won't run
G80:
Geforce 8800 GTS - 320/640M - 96 shader units
GeForce 8800 GTX - 768M - 128 shader units
GeForce 8800 Ultra - 768M - 128 shader units
I made a 16:9 menu and changed the background from one within TMPGEnc's templates collection to an already properly 16:9 cropped JPEG.
When authored and sampled on software player and hardware player there's a thick white lone visible all the way across the top.
What is causing this? I can post a screenshot of it if need be. I also still have my project and all the files associated with it still here on my computer.
I am having a problem creating a DVD-Video. I use 4 video clips and when it gets to the 2nd video clip, I get an Invalid Sample Format error. But when I try to just create it using 2 video clips, including the one that had the error, it works fine.
Are the formats of the 4 videos different from each other? Try separating the clips into separate tracks and see if that works. For instance, put the 2 that work fine in one track and the other 2 in another track.