I get "Illegal floating decimal point calculation order" when making a mpg conversion. I do not understand what I´m supposed to do?

It usually means that your File is Corrupted..And if it happens over and over at the same spot then it is Definately corrupted...You can try to fix it my going to "options" to "Enviromental Settings" to "CPU" and disable the "SSE & SSE-2" then go to "settings" to "QuantiZe Matrix" and Un-Check the "Use Floating piont DCT" this should stop the error from happening but the encodeing speed will be Very slow..Another solution is to try to Frameserve the file to tmpgenc with AVISynth or Virtual Dub.This error is very common with files Downloaded off the net as Many have problems with them which is why Most experienced Users of Tmpgenc don"t use downloaded movies ....

I get this error when min bitrate in CQ is set to an 'bad' value, for instance 10, changing this to 0 or 50 makes the 'Illegal floating decimal point calculation order' dissapear.

Hi, When i try and load a ac3 audio file into tmpg enc to convert to a mpeg i get a system crash (blue screen etc) I have a xp2.1 with aBit m/b hope someone can help, I have tried the latest version also, still same :(


Fester

Mr

What's with the Mr.

ASHY

Well Of course it is going to crash or something Cuz Tmpgenc doesn"t natively Support AC3 Audio..Some poeple have been able to get it to work by Installing a Compatible AC3 Filter....

In term of Video Quality.

That question Is Pretty General so Post a question That is more specific so We doen"t have to Post a 5 page answer on how to do it the "Right" way....

Hey I love this software i use it almost every day.. the only feature i would like to see is a batch mpeg tools option. im doing alot of cutting editing joining, muxin demuxin and it would be great to set it up to run and be able to come back and all 50 operations (just an ex) are done, very similar to the batch setup with the encodes. other then that great peice of software

You can run more than one instance of TMPEGnc if your computer can handle it. Of Course this will be slower, but if you are not at computer, so what??

Hi,
I am trying to use TMPGEnc to convert my avi to mpg2.
The avi are from my digital caemera and my DC is Fuji finepix F401.
When I try to open the avi, program pops a window said "can't be open or unsupport".
Anyone can help me on this issue?

Thanks in advance.
Edwin

The Answer is on this page like 5 times..go to "options" to "Enviromental Settings"to "Vfapi Plugins" and raise the "direct show" to "2"...

Maybe it should be the default setting when TMPEGnc is installed. If your tired of anwsering this question, complain to the people who write the updates for TMPGENc, maybe they will change it in the next release. Or just don't respond at all.

That was very helpfull...I complain to Tmpgenc and they do nothing and then I ignore every one and no one gets there questions answered...ThanX I"ll Do that...

Nice one Minion. I agree with you mate. You only have to have a quick look at the posts to find the answer or use that box thingy above that says SEARCH.

Why is it all the have-a-go hero's just wanna give somebody a hard time for stating the obvious instead of doing something more constructive like answering questions and not knocking the others that do help out for their entitled opinions.

Minion is a VERY helpful guy and just because he is 'merely' making a point there is no need to give him a hard time on the very few occasions when he gets fed up every now and then of the same lame ass question which as he quite rightly states is all over this goddam board when simply using the power of one brain cell and taking a quick look around will yield the answer.

If it wasn't for Minion it probably wouldn't get answered in the first place. I stopped answering that question ages ago because it was obvious certain people were not even bothering to help themselves especially when the answer is usually right under their nose.

ASHY

The program crashed when I tried to open a DV AVI file. Since a lot of people have DV Camera this question will be asked over and over when somebody is new to TMPGnc. This should be given as information with the program.I was lucky Minion gived the solution. Thanks.

I have a problem to enter d2v-files. could anybody explain me how i can get this vafpi-plugin to work???????????

thanks

Are you Talking about the DVD2AVI.VFP Plugin??If you don"t see it listed in the "Vfapi Plugins" in the "Enviromental Settings" then Go into the "DVD2AVI" Folder and Copy and paste the "DVD2AVI.VFP" File into the Tmpgenc Folder then restart the aplication and it should be listed in the plugins list...

Thanx! You saved my problem!!!!Everything works fine now.

I mean: solved my problem, of course (HAHA)

Help !
Similar to a previous post, I have an AVI encoded using XVID codec. When I review under VirtualDub it shows the audio is 5 channels. So first question -
Does this mean it's in 5.1 surround sound?

If it is .. how can I add all the channels to my DVD when I burn?

I have encoded many movies using TMPGE to MPEG2, then authored using Dazzle or Spruceup, but each time the best I get is 2 channel stereo audio.

I have tried seperating the audio from the AVI to an AC3 file using VirtualDub direct stream copy which works, but how do I then get that file back into the movie with all the sound channels???

HELP ME PLEASE THIS IS DRIVING ME MAD!!

What you have to do is either Demux the audio or extract it to AC3 and then after encodeing just the video to Mpeg you Mux the AC3 audio to the mpeg2 video..Now the problem is getting the AC3 Audio out of your AVI file..What you will need is "Virtual Dub" and "AC3FiX" Virtual Dub actually just Demuxes the AC3 file and put"s a WAV header on the File, so you Load the file into Virtual Dub and Save as a wav the ReName it as an AC3 file, then load it in AC3fiX and it will correct the Header..Now just encode the Avi file to a M2V Video file and after encodeing just Mux the AC3 with the M2V file and that is It...you can get ac3FiX here: http://www.quellicheilpc.it/quelli02/download.php?op=getit&lid=84

Many thanks for taking the time to reply Minion. I'll give your suggestions a go.
Cheers.

If you download Virtualdub_Ac3 and use the direct stream copy option you won't need the extra step. Just name the file with an .ac3 extension.
Another way and I think more reliable is to use AVImux to extract the Ac3.

ASHY

Thanks to everyone who has taken the time to help.
I tried the way Minion suggested and it works a treat !!!
Fantastic 5.1 surround sound on my burnt DVD.

Cheers again Minion !!

Bobby

PS. Ashy .. I'll give your suggestion a go as well. Thanks.

Hi

I have a problem using TMPGENC. If I try to load Avisynth (*.avs) files, it says "Can not open or unsupported". I tried setting the priority of the VFAPI Plugins a lot of ways, but it not worked, it just keeps saying the same error message. Someone please could help me with fixing this?

The only thing I can think of is to "Dis-Able" the "Direct show" in the "Vfapi Plugins"...if that don"t work you can try to frame serve with something else like "V-Dub"....

Does it show the AVi-Synth VFAPI plug in in the list? You have to install it first...

Thanks for the answers.

Minion: I tried disabling DirectShow, but that did not solved my problem. The biggest problem is that I want to use DVD2SVCD to convert movies, but that is only working with AVISynth, not with V-Dub.

ABS: in the plug-in list I have a .DLL called Avisynth reader, so I have that installed, but still it says "cannot open or unsupported".

Is there any way to fix this problem, or it is a new kind of problem?

The only solution I can think of is for you to re-name tmpgenc.ini to another name, like tmpgenc.bak, then delete CurrentCfg.tpr and which will allow the program to return to it's original settings. I have solved few problems like that in the past.

NOTE: when replacing tmpgenc.ini, your user defined Q-matrixs will be unreacable, this is why I said to rename it and not delete it so In case you'll need them you could could still copy them from the file later...

ABS

Wait a second, found out another thing that causes this!
After you created the .d2v file, did you delete the source file on which you ran DVD2AVI? if the original file isn't found it also causes this!

ABS: Thanks for the suggestions, I tried them out, but they did not worked for my problem... Maybe it is got something to do with my TMPGENC version (2.54)?

Have you actually tried re-installing AVIsynth? It won't work unless you have it installed correctly. The easy way to check is to open the .AVS file with mediaplayer, it should play the file as if it was a movie if everthing is working ok.
Also what Version of AVisynth are you using?

ASHY

i'm just a beginner but i was getting a simllar message trying to convert avi to mpg and virtual dubit would not work either. Turned out i did not have the correct codec. Need mpg4v3. Installing new codecs solved my unsupported error.

Does anyone have documentation for either command line switches of TMPGenc, or tbe file formats.

Thanks
Tom

There are no command line switches. It doesn't run from the command line yet.

ASHY

Well /BATCH works just fine.

TMPG server is the only version which will work from the command line, but it has yet to be released.

ASHY

I meant that it does work. I use it now. I guess it is a hidden feature that I discovered from one of the user pages on the internet.

I'm trying to convert a movie that's avi format to mpeg. The movie is DivX encoded.
When I try to load it as the video sorce, it says "File can not open, or unsupported.
Is there some setting I need to change, or does the program not support DivX?

"OPtions" to "Enviromental Settings" to "Vfapi Plugins" raise the "direct Show" to "2"...Look before you post next time this question has been answered literally Hundreds of times and usually half a doZZen times a Day....

Hi,

I have edited with Adobe Premiere 6.0 a video which is originally captured from miniDV through Firewire. In Premiere I used Export Timeline, Movie function which makes .avi file of edited video.
Then I try to make with TMPGEnc 2.5 plus a .mpg2 file from .avi for burning a PAL SVCD. After selecting a certain .avi file for input TMPGEnc gives this error message: File can not open or unsupported.

Any ideas why is it unsupported??

Original captured (unedited) .avi file is ok for TMPGEnc. Here are properties info from Premiere:

Original .avi file (ok for TMPGEnc):
------------------------------------

File Path: F:OHJELMATIEDOSTOTADOBEPREMIERE 6.0Levi0c.avi
File Size: 3,74GB bytes
Total Duration: 0:18:00:01
Average Data Rate: 3,55MB per second
Image Size: 720 x 576
Pixel Depth: 24 bits
Pixel Aspect Ratio: 1,067
Frame Rate: 25,00 fps

Audio: 32000 Hz - 16 bit - Stereo

AVI File details:
Timecode: 00:00:01:20
Reel name: '001'
User Timecode: 00:00:01:20
Reel name: '001'
Contains 1 video track(s) and 1 audio track(s).

Video track 1:
Total duration is 0:18:00:01
Size is 3,61GB bytes (average frame = 145,55KB bytes)
This movie appears to have DROPPED FRAMES
There are 26988 keyframes.
There are 13 empty frames.
Frame rate is 25,00 fps
Frame size is 720 x 576
Depth is 24 bits.
Compressor: 'dvsd'

Audio track 1:
Size is 131,84MB bytes
Rate is 32000 samples/sec, stereo
Sample size is 16 bits

Edited file (unsupported by TMPGEnc):
---------------------------------------

File Path: F:OhjelmatiedostotAdobePremiere 6.0Levi2.avi
File Size: 3,36GB bytes
Total Duration: 0:16:10:08
Average Data Rate: 3,55MB per second
Image Size: 720 x 576
Pixel Depth: 24 bits
Pixel Aspect Ratio: 1,067
Frame Rate: 25,00 fps

Audio: 32000 Hz - 16 bit - Stereo

AVI File details:
Contains 1 video track(s) and 1 audio track(s).

Video track 1:
Total duration is 0:16:10:08
Size is 3,25GB bytes (average frame = 145,61KB bytes)
This movie appears to have DROPPED FRAMES
There are 24257 keyframes.
There are 1 empty frames.
Frame rate is 25,00 fps
Frame size is 720 x 576
Depth is 24 bits.
Compressor: 'dvsd'

Audio track 1:
Size is 118,44MB bytes
Rate is 32000 samples/sec, stereo
Sample size is 16 bits

This second file doesn't have time code. Is that the reason??

If anybody knows the answer please send it also by email to
Juhani.Hartikainen@kolumbus.fi

Thanks!!

Best regards,
Juhani

You probably just need to raise the "direct show File Reader" ..You do this by going to "options" to "enviromental Settings" to "vfapi Plugins" and raise the direct Show" to "2"...There are Much better ways to encode to mpeg 2 if your files are in Premier that haveing to re-render the file to AVI, you can frame serve it or use one of the many Mpeg plugins..The new Premier 6.5 has it"s own Mpeg encoder...

Hi,

And thank you! It helped. I'm just a beginner with these DV-video-PC things so I'm curious about what I did. Why I had to give higher priority to DirectShow Multimedia File Reader? Originally it had -1.

And what is the difference between captured .avi file and rendered .avi file (not supported by TMPGenc before this priority change)?

You wrote: There are Much better ways to encode to mpeg 2 if your files are in Premier that haveing to re-render the file to AVI, you can frame serve it or use one of the many Mpeg plugins..

What is frame serveing? How do I do it with Premiere?

Is it possible to encode directly from timeline of Premiere with some plugin?
Where do I find them? Is it possible to use TMPGenc as plugin?

Lots of questions because this beginner wants learn these things.

Thanks for advance!!

Regards,
Juhani

I want to use TMPGEnc's compressor in Adobe Premiere because my avi's created by my digital camera are limited to 2.4 GB which is only about 20 minutes of video. So i want to be able to create my video cds using TMPGEnc's compressor in Premiere. Can anyone tell me the name of the compressor so i can choose it from the list. It doesn't have a general name like TMPGEnc, or MPG etc etc.

It won"t be in the List..Unless you have somehow installed it as a Plugin..But you can use the "Premier Video server" to frame serve to Tmpgenc..you can get it at : http://www.videotools.net/