This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I have saved a project that I was coverting to vcd. But when I go to open the project then I hit the start button to continue it says that the file already exists do I want to overwrite. No, I don't want to overwrite it took hours to get it to the point where I am at. How do I continue from where I left off?
What exactly do you mean by "How do I continue Were I left Off"???? if you started to encode a File and you stopped encodeing for some reason you have to start over again...Once you start a encodeing Project you can not stop it and start were you left off......
I downloaded a compressed AVI, When I tried to convert AVI into a VCD format (MPEG-1) the video was choppy and not fluid. I found that breaking it into both Video and Audio and converting those files into a VCD format (MPEG-1) works a little better than direct convertion. The problem I'm running into is the video is still not fluid... its choppy (not as bad as before). I'm still hacking my way through TMPGEN, does anyone out there have any ideas or tricks to correct this. Any help would be great. Thanks in Advance for any help.
I have a movie called "The Gift". It is 700mb and the video is Divx3 Low-Motion, and the sound is MPEG-1 Layer3. The movie is 112min long.
Problem 1 - TMPGEnc will not convert the sound. The picture converts to a vcd file fine, but no sound. No error, just no sound.
Problem 2 - I used VirtualDub to get a wav of the sound but when using TMPGEnc to combine the sound with the original avi file the sound was out of sync and I can't find an easy way to correct this.
Problem 3 - In Environmental Setting (VFAPI plug-in), the DirectShow Multimedia File Reader is set to priority -1. If I make this any higher TMPGEnc will freeze immediately.
Problem 4 - I choose a bitrate of 750kbs so that I could fit the entire movie on one 80min CDR and TMPGEnc indicated the output file would be 790mb, however it came out over 1gig. I have tried samples with various bitrates and they all come out the same size no matter what bitrate I use (?). It's as though TMPGEnc ignores my choice of bitrate. I am using MPEG-1 Video-CD (non-standard) as the Stream type.
1. Yeah, that's nearly normal if you convert some AVIs with VBR encodet Sound.
Try a modified Version of VirtualDub to extract the Sound (VirtualDubMOD).
2. See 1
3. Maybe you have a conflict between some Codecs. If all is correct, TMPGEnc will not freeze.
4. That's a Problem with TMPGEnc 2.59. Use an older or newer Version for Multiplexing Non-Standard VCD.
> Any suggestions?
Yes! Read the Board! None of your Questions is new.
Try useing the "Clip Frame" and "Video Arrange method" settings in the "Advanced settings" ,You can add Boarders to the Top and bottom of the screen so the Frame doesn"t get Cut off By the TV Screen....
Actually, when you clip the frame, the frame doesn't get clipped. How do I make it so I don't clip anything? Also, TMPGEnc is acting very strange. First, when I clicked on the AVI file for video/audio source, it says it was unsupported! It worked in the past and I can play the source files. When I tried again, it only worked for the video source while the audio source is blank and the output is a m1v file. Argh! When I finally get it to work after a few tries, TMPGEnc closes automatically, or it freezes or it just won't encode or, it encodes the first frame and the rest are black leaving only the audio!!!
Well it seems that you are asking the Impossible ,You want to change the image so you can see the Subtitles But not change the image ,this Just can not be done you have to take the good with the bad...You can use the "Video arange Method" to add boarders without squishing the Image it just makes the image a little smaller with Boarders on the top and bottom..You can"t Move the subtitles so they are higher on the screen or anything like that, it just can not be done....as for the "Unsupported" message you can usually fix this By raiseing the Priority of the "Direct Show File Reader" in the "Vfapi Plugins" to "2"...
Yes, how do I add borders to the bottom (and maybe left and right)? I tried selecting "center" but then the characters in the video seemed squashed. Same with "center (keep aspect ratio)". I'm making an SVCD for my friend so it is 480x480. I hope it works on her player. Is making an SVCD/VCD for a friend allowed?
You seem to be going about things wrongly here. Surely the subtitles can't have been added so far below the T.V screen area so that you can't actually see them. This would be a TV set problem with a severe overscan setting not a problem with the movie.
I take it this movie is full screen in the 4:3 ratio.
If so make sure you set the input aspect ratio to 4:3 525line(NTSC) and the output ratio to 4:3.
Select 'Full screen (keep aspect ratio)' as the 'Video arrange method'
If this still causes the subs to be below the Screen area of a known good working TV then shoot the guy that made this Movie cuz he obviously did not know what he was doing.
If this is the case then select 'center(custom size)' as the 'Video arrange method' using the 'Arrange setting' button in the 'Clip frame' filter and adjust the image as required.
By the way if you are making a SVCD. You will have to set the output frame size as 720x480 first so you can adjust the image without the aspect ratio distortion of SVCD.
Once you are happy with the image simply set it back to 480x480.
Where can I find the diffrences or bug report for NT2000 and Win98. I have noticed that there are things that I can do in the 98 os that I can't do in 2000, when using TMPGenc. An example, when I Simple De-multiplex in 2000 I don't get the whole video however I get it in 98.
hey i'm sort of new to this, but i'm learning fairly quickly. i have ran into one problem, however. after encoding an asf file to mpeg (for vcd)the sound only works about 30 min or so into the movie then stops completely. any help would be appreciated.
Tmpgenc sometimes has Problems with ASF/WMV audio, so you have to extract the audio to a WAV file then use the wav file as the audio source in tmpgenc..To do this you will need a Audio encoder that can extract ASF/WMV audio and decode it to WAV audio...one Good Program for this is called "DB Power AMP", you can download it for free at " http://www.dbpoweramp.com/ " you have to Download the Main Program and the WMA audio codecs,once the program is installed and the Codecs are properly installed you just have to right click on the ASF file and go to "Convert" then choose "Wav" from the conversion menu..this is a Very good audio encoder and there are many codecs that you can download to convert many different formats, just read the instructions carefully on how to install the WMA codecs....
I am newbie but have figured this stuff out pretty good so far I have 2 small questions and hope you are able to help since you know just about everything on this subject. What size do I want to make the picture for best tv viewing, and does increasing the bitrate sharpen the picture, or is there a way to sharpen picture? Also would you recommend i encode to vcd or dvd? I am capable of recording both formats but am not sure what program to use once i have encoded to mpeg, for dvd, in order to transfer to dvd. Thanks for any insight you may be able to share.
Well the Resolution you use is Not really up to you it is Up to the Standard you are useing, Meaning if you want to make a VCD then you have to Use the VCD standard Resolution of 352+240 for NTSC and 352+288 for Pal, unless you want to make a XVCD which you get a Few More options like 352+480 or 704+480 NTSC, but there is No Gaurantee that it will play in your DVD Player, and you would have to use a Much higher bitrate when useing these higher resolutions and Bitrates your DVD Player Might not be able to handle them ...As to if you should choose to make a VCD or a DVD that is basicly up to your Source AVI File, If you have a Lower Quality AVI file then I would make a VCD and if you have a Low resolution AVI file then I would Make a VCD Cuz Up-sizeing the Resolution of an AVI file to DVD Resolutions will Greatly degrade the Quality of the resulting Mpeg file..But if you have a Really good Quality AVI file with a High Resolution then it would be suitable for DVD, But most AVI Files downloaded off the Net are not going to be suitabe for DVD Authoring Cuz of the Low resolutions and Quality ..as to how you would burn a DVD you would have to have a DVD Authoring Program, there are Many such Programs and they vary in Quality and Price..I use "Ulead DVD Workshop 1.3" for Basic stuff and it runs about $250 But for More complex stuff I use "Sonic DVD producer 3.1.1" which runs about $4500, it can make DVD"s with all the features of Retail DVD"s that is Probably why it is so Expensive, there are ones that are more expensive like "Sonic Scenerest" which runs about $20,000....So I would stick with something easier like "Ulead DVD Workshop" which a 30 day trial can be downloaded off there site at " http://www.ulead.com "..........
Im having a strange problem when trying to convert an avi to MPG1. I set the bitrate to 128, and when the conversion is done, the file size is about 200 megs(video is about ~20 min.), and real1player says, that the bitrate is 1395Kbps?
Is this a bug in TMPGEnc, or am I missing something?
Well a Bitrate of 128kbs is WAY WAY WAY WAY TOO LOW for a Mpeg file unless the Resolution is Really low like 36+24 and that is a Really small image...and if you are useing the 2.59 version there is a Bug in it that if you are encodeing to VCD then it will not let you lower the Bitrate lower than the VCD Standard of 1150kbs...and if you are useing a Different version and makeing a VCD then you have to set the "System" setting to "Video-CD Non-Standard" or it will pad the stream to make it VCD Compliant.....
Hi,
i would like to combine two avi files. Wich program is the best for this ( because the video should be good quality).
Is it possible with tmpgenc ?
Thanks.
Greet¡s
Videofreakazoid
If you Just want to Take 2 AVI files and Turn them into 1 Big AVI file then this isn"t the Software you want..You need something like "Virtual Dub"....