Hi

I have just purchased TAW4 and have found the every time i attempt to simulate a dvd the pc crashes and gives me a blue screen...is this a memory leak, bios clash or what?

Had been running version 3 with no issues at all.

Old versions were unistalled and a full new install completed.
Xpress 4 as well.

System was not having this issue until this software was installed.

Is running on XPPro SP2
4 Gig Ram
4TB FREE HDD
Nvidia 7500GE 512mb Graphics with 2009 Drivers
Intel Dual Core 2.7

Any thoughts, suggestions or ideas?

Thanks

Mark
New Zealand

It's possible that it's a memory leak. Did you contact support? They can probably give you a definitive answer.

***SOLVED***

Hi,

With awesome help from the support team I have found the problem to this issue.

It is an issue if you are running a ASUS motherboard with Enhanced Video and dual screen features.

The file that cause the crash is atkdisp.dll.

Here's what I did to fix it:
Desktop-> Properties-> Settings-> Advanced-> ASUS

I turned off ASUS OSD, and ASUS Splendid.

OSD and Splendid are both video altering software that is supposed to enhance the "experience". OSD allows you to set Brightness/Contras/Gamma. Splended allows you to set various coloring options.

Some have also fixed this issue by moving the atkdisp.dll to another folder.


the actual link to the solution is
http://www.techsupportforum.com/hardware-support/driver-support/166722-resolved-re-atkdisp-dll-problem-causes-blue-screen.html

anyway hope it works for you...it did for.

Thats to TMPGENC support who provided me the link to the solution and offered a steady stream of possible fixes and work rounds...

Mark
NZ

>Hi
>
>I have just purchased TAW4 and have found the every time i attempt to simulate a dvd the pc crashes and gives me a blue screen...is this a memory leak, bios clash or what?
>
>Had been running version 3 with no issues at all.
>
>Old versions were unistalled and a full new install completed.
>Xpress 4 as well.
>
>System was not having this issue until this software was installed.
>
>Is running on XPPro SP2
>4 Gig Ram
>4TB FREE HDD
>Nvidia 7500GE 512mb Graphics with 2009 Drivers
>Intel Dual Core 2.7
>
>Any thoughts, suggestions or ideas?
>
>Thanks
>
>Mark
>New Zealand

Happy New Year to all.

Just purchased Xpress 4.0 and it is a thing of beauty.

My question: why is my CUDA option panel greyed out? I'm running Vista Ultimate 64 with 4 gigs of memory and my graphics card is the 768MB NVIDIA GeForce 9600GS.

Thanks in advance!

m22

Try by updating your graphic card´s driver, it may be is related with it,
good luck

Wouldn't worry too much about the cuda support anyway. It actually makes conversions slower on my system (QX9650 quad and 8800 GTS 512 2xSLI), and on many files the conversion stops with error "parameter is incorrect" at the very end even when not using any filters at all!

I enabled the CUDA renderer on the trial version and it works, just bought the full version, and I think it also works. What you were probably missing: go to Nvidia and get the CUDA DLL's - It's not a giant program, but it's essential: kind of like the operating system for doing logic on your GPU - has to be installed, or none of the apps can run. You should have no problem finding the download.

I'm using TMPGEnc 4.0 Xpress to convert Quicktime files (Codec: H.264, 23.976 fps) into .avi (Codec: Panasonic DV CODEC-DVSD, 23.976 fps) so that I can edit them in Premiere Pro 1.5.

The converted files play fine. The problem is that they are missing the 1st frame of each clip. Sometimes TMPGEnc adds 1 frame at the end of the clip, other times it creates a clip that 1 frame shorter than the original.

Any ideas?

Happy New Year to all.

Just purchased Authoring Works 4 and it is a thing of beauty. A major advance. Props to Pegasys!

My question: why is my CUDA option panel greyed out? I'm running Vista Ultimate 64 with 4 gigs of memory and my graphics card is the 768MB NVIDIA GeForce 9600GS.

Thanks in advance!

m22

There is no CUDA compatibility with Authoring Works 4.
4.0 XPress is the only TMPGEnc product with CUDA options.

>There is no CUDA compatibility with Authoring Works 4.
>4.0 XPress is the only TMPGEnc product with CUDA options.

Ooops. That's what I meant, of course. (Purchased both products at the same time.)

Will move this to appropriate forum.

I am having trouble with batch encode, using TMPGEnc 4.6.2.266. When I attempt to add project to batch encode, I get error message "Incompatible file format," then " batch encode has encountered a time out." Just started happening, worked fine a couple days ago. Have tried reinstalling program, running spyware programs, etc. to no avail. Anyone else had this problem??

Ok folks, just tried to go the custom menu persona template, yet i selected the folder were it was an nothign showed up. so what is the file exntesnion that should alow the program to view and pic it up.

plus with the custom menu which is motion menu, how do you ensure that the menu buttons which appear half way through arent active as soon as the motion video shows.

What is this "persona" template? Is it a custom template created by someone? As long as it's a template created by TAW4, it should show up. Make sure "All the templates" is selected in the "Types/keywords" list on the left side of the menu wizard.

As for the buttons in a motion menu, they will always be active, even if they are invisible because of a "fade-in" effect. I don't think there's a way around that.

motion menu as in video file with menu on it.

and it was a custom menu that somebody created not the company.

but when the custom section states that you should be able to add the motion menu, but nothign shows.

also how do you add links onot the main menu since it gives the users option for a audio page, yet no navigation tab on the main menu for the audio section?


its very irritating when they state that you can add and change whats on the custom menu the user does, yet they actually retrict what the user can do which is just daft.

Where exactly are you trying to load the persona template?

From the menu wizard, select "Create a menu based on a template". In the next screen click on the "Other templates..." button and select the folder where the custom template is saved. It should then show up in the template list.

The extension for saved templates is .tda4mt.
If it is a motion menu, the video files used for motion backgrounds will not be embedded into the template file, so those must be saved separately in the location the template file expects them to be.

As for audio page buttons, it should automatically add an audio button if an audio page exists. If you only have one audio track for your videos, it will not create an audio page.

If I'm encoding video to play on an HTPC hooked up to a widescreen TV (1920 x 1080 pixel-matched), do I use the same methods of AR encoding as if I were burning to a DVD to be played in a DVD player, or does my AR methodology need to change?

In other words, a 16:9 encoded video looks odd before being burned, but looks fine when played on the DVD player. I'm worried that any work I do prior to my HTPC build may have to be redone if I just stick with the old methods.

Thanks!

I guess it depends on what type software you're using for playback. If it can adjust the pixel aspect ratio like a DVD player, then you shouldn't have to change your encoding method.

Is there a way of applying the same settings to multiple thumbnails? I need to change the start and end frames for 21 thumbnails, but the the Menu Item Editor doesn't allow. There should be a multiple edit mode for simple things like this or the option of copying last change in a thumbnail to others or a "Change ... for selected thumbnails" like the existent for menus.

You can change certain things when multiple thumbnails are selected, but changing the start and end frames isn't one of them. Unless your thumbnails were all exactly the same, I'm not sure how changing the start and end frames at the same time would work.

You can select multiple thumbnails by holding down the ctrl key and clicking on the thumbnails you want to change.
Then, right-click on one of them and select "Menu Item Settings" from the menu. You'll be able to change the effects and highlight colors. You can also change the width and height of the selected thumbnails.

Well, I think the clips could have a different size. All I had to do was set an end time less or equal to the smallest. Anyway, all of them have almost the same size.

That's true. Unfortunately, the program can't do it.

Another way to change other settings for multiple items is to click on the "Edit menu" button at the bottom of the Menu stage. From here you can change the fonts, effects, and backgrounds for all menu pages or even select which pages and items should be affected.

I noticed that, thank you.

Well, let's hope a future version has that feature.

Thanks again.

Is there anyway in TMPGEnc Authoring Works 4 to convert .vob files to .mpeg or .avi files?? I tried using the save to Harddisk method that used to work for DVD Author but Authoring Works 4 saves the files as .dvddata files.

Any help on if this is possible and how would be appreciated!!

Thanks.

It's been saved as a .dvddata file since DVD Author version 2, so this is not a new thing in Authoring Works 4. The .dvddata file is actually just a mpeg file and I was able to play it in Windows Media Player. You can probably just rename the extension and it should work like any other mpeg.

get hold of dgindex, load the dvd into it by selecting the main vobs of the movie, tgo to audio and selected "selects all " and then save d2v and file this will save a d2v file which will contain all the details, but the other file will be a mpeg-2 file.

I tried to author a Bluray disc with Authoring Works 4.
It looks nice on the computer. The m2ts file plays on my computer as 1080p file.
BUT on the PS3 it changes to 480i after the menu.

I tried to re-author with no menu, same result.
PS3 is the only BD player I have (I do have a BD recorder, but I do not want to play BD's on my PC).

What was the source video resolution? If it was a DVD, then 480i would be the correct resolution. And since DVD-Video is compliant with the Blu-ray spec, it wouldn't re-encode it to 1080p.
If you really want it to be 1080p, you'll have to change the encoding settings to force it to encode at 1080p.

You can do this by going to the Source stage, and click on the "Settings" button for your Track containing the 480i footage.
In the Track settings window, select the Video tab and select "Re-encode all video as below" for the Encoder mode. You'll probably have to change the Profile & level to "MP@HL", then you'll be able to select "1920 x 1080 pixels" for the Size setting.

That should do it!

Hi, the source resolution is 1080i
It was a WM9 encoded HDTV broadcast that I want to make a BD disc off.

I should have mentioned that the completed output file runs in 1080p when dumped in to media player classic HD.
So the file physically IS 1080p.
However, when inserting the authored BD disc in to my PS3 it defaults to 480i after exiting the menu (I chose HD for menu too).

If I author without menu, it starts off ads 1080p according to my TV, but as soon as a picture appears, it drops down to 480i.

Something is apparently wrong with the "menu" exit which somehow forces my PS3 in to a 480i rendition of the movie.

Are you sure the actual video itself was encoded as 1080p and not 1080i?

I don't see why it wouldn't display on the ps3 if it actually is 1080p, especially if the menu is displaying correctly.

Check the Display settings on your PS3 and make sure you have 1080i checked. It's possible that you only have 480i and 1080p checked, so when the resolution is lower than 1080p, it automatically goes to 480i.

I have checked all these things, and yes, the video is 1080p.
However, as I stated, on disply it reverts to 480i after the menu.
Which is why I called it a bug in the first place :)
I'm more then happy to forward you the 12GB file to check for yourself.

I am having this same exact problem on my ps3 as well.

I will test the bd-r I made on another player and see what happens.

Confirmed!

This is a problem with Authoring works 4, when you have
it "smart render" used.

1080i is on the disc

1080i is played back on sony BX-1 or S350 bd player.

480P is played back on ps3 on same disc.

If I just author with 1 hr and don't smart render
the ps3 plays it as 1080i.

clearly a bug in this app.

Having checked things again just now, I have found
the problem is the PS3 display settings.

you must go into "display setup" then "custom"
and check each box. 1080i and 720P were NOt checked
on my ps3 and this video is 1080i. The ps3 will not
output 1080P of 1080i source.

now when I hit the display on my plasma it properly
reads as 1080i.

I suspect your 1080P video may not actually be 1080P
but 1080i. see if you can get it display as 1080i.

How can I crop the video files? I need to crop from top about 4lines and from left and right. I use virtual dub for making divX files and there crop isn't problem. In TMPGEnc Authoring Works 4 I dont know where is this function.
Can you help me? ... some screenshots etc.
Thanks !

Sorry, there is no crop function in Authoring Works 4. You'll need 4.0 XPress or Plus 2.5 for cropping the image.

Ok this is possible but not with this software.

get hold of megui update it after installtion. also get hold of avisynth

go to tools>d2v creator , this will allow you to select a video file and create a d2v file which will hold all the vital details about the file and where it is on your system, now go to tools>avisynth creator and load the same d2v file.

now go to filters if the source is interlaced ie lines across the screen often in motion areas and dupe frames...you will see it ghosting a bit or same thign on screen repeat itself if its a motion scene. although some scenes may have been worked to look like this.

anyway. click on anaylze and when thats complete it will tell you what it is, ie could be progressive which is ok no work needed for that, but anythign else then that means its needed, now go to options and select the source input dar ie what the aspect ratio of the video should be , then tick crop and autocrop this will automatically crop the black bars, but you may wish to check yourself aswell and add a little. Then tick resize and adjust as you wish, and tick apply preview as this will show you how it looks when you adjust.

when you feel you have done what you need, on the output bit down the bottom select where you want the avs file , then press save.

now with this you can add to tmpgenc products even thought its not offically supported. or virtualdubmod and you can carry on enxcoding.

or use megui encoding system to use outside encoders within it.

good luck

i got this error when i try to do divx authoring. "tmpgenc error in divx authoring (cw-6)". can someone help me. Tq in advance.

-pocoyo-